DigitalWoodworker.com

During our recent entrance way renovations I had a lot of time to develop a hatred of the look of our doorbell. It’s a hunk of plastic covered in gaudy designes.
Having been long inspired by the Greene & Greene wall sconces I decided to embark on making my own as a cover to the doorbell hardware. I’m NOT a stained glass artist and as I looked at what went into making a piece I realized I didn’t have the time to learn (on this project, but I’ll definitely do so in the future).
The Wood: The wooden parts of the sconce are your basic Greene & Greene woodworking. It’s all just frame and pannel constructions with groves, mortices & tenons. The lighter wood is my standard Cherry with liberal used of ebony plugs (I had to batch out 18 ebony plugs for this project. This video by William Ng is invaluable is speeding up this process!!!). The top I carved out of a solid block of Cherry utilizing a router, rasps & carving chisels.
The Glass: In our last house the former owner has done some wonderful stained glass looking artwork on a number of our windows utilizing a product called Gallery Glass. Would this product fool someone that knows stained glass? Not even close. But it really does come out nice looking, and unless someone looks really closely it’s very hard to spot that it’s not the real thing. So I picked up some stained glass for my base piece and used the Gallery Glass as color gels on top of it.
As for lighting… since I’m using this as a doorbell hardware cover I didn’t have room for any kind of traditional bulb. So instead I used LED Flexible Light Strip and a 30 Watt 12v LED Power Supply Driver. I cut a hole in the wall behind the doorbell hardware and stashed the transformer inside the wall and ran a 110v line to it from a nearby outlet. After that it was just a matter of peel and stick the LEDs to the doorbell hardware and cutting to length.
Right now I have a photo sensor controlling the light, unfortunately the entranceway doesn’t get quite enough sun many days so the light is almost always on. So I’m going to swap it out with an analog timer control.

Source

Recently a lot of the cherry I’ve been working with has had a lot of curl and figure to it. As much as I love my Stanley Type 2 #604 the 45° bedding angle just isn’t steep enough to handle highly figured  hardwoods.

Modern western plane makers have two approaches to this problem. Lei-Nielsen sells replacement frogs for it’s planes that come in 50° and 55°.  The other approach is to just flip the blade over, make the plane bed a low angle, and work with the bevel up (such as the Veritas Planes).
I wasn’t quite ready to drop a couple hundred $ on a new plane so I went with a third option. Hock Tools sells very nice and very thick blades for Krenov Style plane making. A few years ago  I bought one of these blades with the plan of eventually making a small infill plane. Allas, the blade had just been gathering dust on a shelf next to the stack of steel and brass.
Having also developed an interest in Japanese style planes over the last few months I decided to make a high-angle pull plane with my Hock blade.
True Japanese planes have a tapered blade that wedges itself into the body (Dai) due to a matching taper cut into it. (if you want to see the process that goes into cutting a Dai this page over on daikudojo.org has a nice photogallery).
The hybrid plane I made may look somewhat like a Japanese plane,  but it’s construction technique is based on Krenov Style plane making.
Matt over at mattsbasementworkshop.com has a great 2 part video series on making a Krenov plane from the kit available at Hock tools (part 1, part 2). Kari over at The village carpenter also has an article about Krenov planes. Finally David Finick wrote an article in Fine Woodworking issue #196.
I made my high angle smoother out of quarter-sawn Wenge because I  had it around, it’s DENSE, and I thought it would look cool

Source

Source

Source

I haven’t been woodworking very long and like most North American’s when I think of a saw I think of a traditional western push saw, and when I think of a plane, a picture of a Stanley #5 comes to mind.
As I dove into this new hobby a couple years ago I stumbled across a plastic handled Marples pull saw while perusing the aisles of my local Big Box hardware store. I’m not sure what possessed me to grab that saw instead of a more traditional western saw. I had no idea about the origen of a pull saw concept, so I can’t blame my decision on my martial arts background or my love of Asian aesthetics… There was just something about that saw that seemed to make sense to me.
It certainly wasn’t the greatest saw in the world, but more and more I found myself gravitating toward that saw over my circular power saw during every construction project.
As I’ve slid down this slope into a full woodworking obsession, finding English language info on Japanese tools has been a struggle. I scour the Internet and bookstores constantly looking for more information. Along the way one of my favorite resources has been Wilber Pan’s blog at http://giantcypress.net/.
So “Get Woodworking Week” is upon us and I feel the need to somehow contribute the the scant body of English language information on Japanese woodworking.

Let me start out with tool selection. Later this week we’ll dive into making a work surface.
Saw’s: Why a pull saw over a push saw?
Anyone that takes a look at Japanese joinery will instantly be stuck by the complexity and precision of each joint. The secret to this joinery (other can skill and time)? A tool  designed for precision joinery. By pulling the saw to cut the wood, vs pushing it, it allows the saw to be MUCH thinner and this allows the woodworker to be much more precise no matter what kind of joinery they are cutting.
The saw I started with is this one: Irwin Double Edge Pull Saw and it or this one: Shark Corp 10-2440 Fine Cut Saw can be found at most big box hardware stores. If your only option is a local store you can pick one of these up and get to work.
A step up I would recommend is that some Ace hardware stores in the western US sell saws by Kakuri. I picked up a 240mm Ryoba (double sided) saw and a 270mm cross cut blade a year ago and the 270mm is still my goto rough stock breakdown saw.
If you are willing to shop online, your saw options open up dramatically. My recommendation is to grab a Gyokucho Brand Ryoba in a 240mm length. This has been my goto saw for just about everything for years. http://www.japanwood...0&dept_id=13088 you can find them for under $40 many places online.
If for some reason you want to spend more… the saw I’m currently lusting after is a Noko-giri Kobo Ryoba. Jay van Arsdale introduced me to that saw last year at Woodworking in American and it is a smooth cutter. They ware a bit harder to find and run around $75. http://www.toolsfrom...ath=316_318_504

Chisels:
If you are sticking to hardware store options I would get a set of 4 or 6 Stanley FatMax’s (ok) Irwin Blue Chip’s (better).
If you want to start a collection of Japanese chisels go grab a couple of the Japan Woodworker house brand, 1/4″ and 1″ sizes. $43 for the pair.
http://japanwoodwork...6&dept_id=12769
http://japanwoodwork...4&dept_id=12769

Planes:
This is an area where I know very little about Japanese tools. I still use western planes just because I managed to ammas a collection of nice old Baily’s from flea markets. If you are willing to take the time to learn about what is good vs what is crap you can find a some amazing deals at flea markets and yard sales.
Unfortunetly stay away from any of the offerings at the hardware store, they just aren’t quality precision tools.
If you are buying new, a decent low angle western plane block plane is the Woodriver from Woodcraft, $90 or if you can afford it the Lee Valley is really nice, $140.
If you want to go down the Japanese plane route: this is a good place to start 48mm 47-1/2º Hiroetsu Polishing Plane, $83

A few other tools you’ll need to start:
A hammer or wooden mallet, a tape measure, a drill, and an accurate 12” adjustable square (I find the PEC squares are a great quality and value). A couple of large clamps come in handy at times as well.

Later this week we’ll dive into our first project, a set of Japanese joinery sawhorses. They are a great first project and give you a work surface that will hold up the the abuse of years of hand tool woodworking.

Thanks to Wilbur Pan for a couple of the tool recommendations. If you have any questions about Japanese tools another great resource is Stu over at http://www.toolsfromjapan.com. He knows more about value and tool quality than anyone I know and is always happy to answer questions.
PS: sorry for some of the photo quality. My DSLR is down for repair, and I was shooting with my iPhone in a hurry.

Source

So as Ron Hock so eloquently put it in his latest newsletter:

“Here’s the story: It all began with visionary and passionate woodworking bloggers who – ahem –  were drinking together  one evening in Covington, Kentucky, during Woodworking in America 2011.
Imagine the bar, please. Imagine the bloggers, beers in hand and orders up. Together they fret and cry aloud.
     “We are concerned that the appreciation of finely-crafted furniture will be lost in this disposable world we so love to hate! If we do not cultivate a new group or even a whole new generation of woodworkers, who will we bequeath our tools to once we’ve planed that last plank!”

So we came up with a small way we could help “get folks off the sideline and into woodworking as a hobby.” Since I was one of those bloggers — drunkards — I figured I better contribute something.
Tom Iovino, from the blog Tom’s Workbench, is coordinating our efforts. Many of us will be posting articles all week regarding first tool selections and good starter projects. This is a great opportunity for anyone to jump in and get there hands covered in sawdust. So please participate and post your results!
You can find out more over at  Tom’s Workbench. I personally plan on doing 1-2 articles on getting started with Asian style tools and setting up a basic shop. So tune in next week for those. Ok I’m out to the shop to make those projects.

Source

Source

Day one on Woodworking in America was as good as expected! Much was learned and much fun was had. Hand tool Olympics day one, done, with much heckling

http://digitalwoodworker.com/wp-content/uploads/2011/10/IMG_7164-150x150.jpghttp://digitalwoodworker.com/wp-content/uploads/2011/10/IMG_7172-150x150.jpghttp://digitalwoodworker.com/wp-content/uploads/2011/10/IMG_7176-150x150.jpghttp://digitalwoodworker.com/wp-content/uploads/2011/10/IMG_7188-150x150.jpghttp://digitalwoodworker.com/wp-content/uploads/2011/10/IMG_7196-150x150.jpghttp://digitalwoodworker.com/wp-content/uploads/2011/10/IMG_7220-150x150.jpghttp://digitalwoodworker.com/wp-content/uploads/2011/10/IMG_7232-150x150.jpghttp://digitalwoodworker.com/wp-content/uploads/2011/10/IMG_7243-150x150.jpghttp://digitalwoodworker.com/wp-content/uploads/2011/10/IMG_7250-150x150.jpghttp://digitalwoodworker.com/wp-content/uploads/2011/10/IMG_7262-150x150.jpghttp://digitalwoodworker.com/wp-content/uploads/2011/10/IMG_7270-150x150.jpghttp://digitalwoodworker.com/wp-content/uploads/2011/10/IMG_7271-150x150.jpghttp://digitalwoodworker.com/wp-content/uploads/2011/10/IMG_7273-150x150.jpghttp://digitalwoodworker.com/wp-content/uploads/2011/10/IMG_0603-150x150.jpghttp://digitalwoodworker.com/wp-content/uploads/2011/10/IMG_0606-150x150.jpg

Source

A few months ago I somehow got conned into participating in the Hand Tool Olympics at WIA, and whats more I’m part of a blogger team; I’m sorry Ian and Steven. Seeing as most of my hand tool woodworking involves Japanese saws I’m kind of the team handicap. (did I mention I’m sorry guys?)

Well, about the only thing I have a chance at is, edge jointing a board and ripping. So I embarked on an adventure to figure out this western sawing thing.

First things first… it looks like western woodworkers use something called a saw bench. Who better to teach me, than the master off all things western knuckle dragging “the Schwarz“? Utilizing this article and online access to this video i knocked it together in a few hours off and on.

I dont really have the western saws to build it like the master… so much to Wilber Pan’s chagrin I built it using my Japanese saws.


“The way I look at it, it’s doubly ironic since a western saw bench will be of little use with a Japanese saw.

On the other hand, Nik does not need to apologize for using the best kind of saw there is.” – Wilbur Pan

Even with all that, it went together great; and as usual Christopher Schwarz‘s classes and articles are amazing: educational and entertaining.

Now I just need to figure out how to use this thing.



Hmm…. that doesn’t seem to work very well. Maybe Wilbur was right?



That seems to work better, but I really  have no clue what I’m doing! Sorry guys! Our WIA team in screwed! But at least I’ve used a saw bench and a western saw once, and that nice Disston D-8 Rip saw I have isn’t just hanging on the wall.

Anyway… Supper excited about WIA later this week. Can’t wait to hang out with the online woodworking community and enjoy some great classes! Hope to see you there!





Source

Come one! Come all! Please come hang out with us, we need friends!

A small group of ruffians spent much of last years Woodworking in America conference hanging out together. So much so, that George Walker called us out as the “American Chopper crew”; for whatever reason, I guess we look disreputable to the design master.



Well we’ve decided to start this years conference with a bang. It started out billed as a blogger gathering, but really it’s just an online community gathering and all are welcome! (Thank goodness or I wouldn’t have been allowed)

Date and Time: Thursday, September 29, 7:00 p.m. until they give us the boot or we remember how old we really are.
Location: Keystone Bar & Grill, 313 Greenup Street, Covington, Kentucky
Facebook invite if you want to RSVP (no need)

I know no one knows me but we’ve got tentative confirmations from real celebrities. Such as: Kari Hultman, Tom Iovino, Steven Taylor, Rob Bois, and Matt Vanderlist. So get your butt there. If you show up late I can’t guarantee that I’ll have left you any of the good beer ;-P









Source