BigBen Posted May 29, 2013 Report Share Posted May 29, 2013 I am trying to put piece together a cyclone system. I currently have Oneida cyclone body and filter I got from CL. What I need is more motor, impeller and motor housing. My question is would Grizzly G1030 motor and impeller be able to support the system. The 12.5" impeller worries me a little. I plan on running 6” main line about 25’ long. Thank you for your comments in advance. Cyclone Bodyhttp://www.oneida-air.com/inventoryD.asp?item_no=SSX060000&CatId={AF788678-CC99-4A98-A11A-D46574885567} Dust Collectorhttp://www.grizzly.com/products/3-HP-Dust-Collector-with-Aluminum-Impeller-Polar-Bear-Series/G1030Z2P Quote Link to comment Share on other sites More sharing options...
duckkisser Posted May 29, 2013 Report Share Posted May 29, 2013 ben I have seen videos of your shop while you were turning do you have room for a big dust collector? Quote Link to comment Share on other sites More sharing options...
BigBen Posted May 29, 2013 Author Report Share Posted May 29, 2013 I do. Built new shop. Quote Link to comment Share on other sites More sharing options...
krtwood Posted May 29, 2013 Report Share Posted May 29, 2013 Clearvuecyclones does sell their impellers and housings separately if you wanted to go that route, or get the impeller and build the housing yourself. Bill Pentz has instructions on his site http://billpentz.com/woodworking/cyclone/blower.cfm Quote Link to comment Share on other sites More sharing options...
duckkisser Posted May 30, 2013 Report Share Posted May 30, 2013 good for you ben im jealous Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.