Pwalter5110 Posted April 8, 2014 Report Share Posted April 8, 2014 I don't post all that much, but I read a lot on here. It seems like PB hasn't posted in a while and I just noticed. I hope he is doing alright. Quote Link to comment Share on other sites More sharing options...
..Kev Posted April 8, 2014 Report Share Posted April 8, 2014 I did a little checking around earlier and talked to a few folks but, didn't come up with any answers. Like you, I hope all is well with PB 1 Quote Link to comment Share on other sites More sharing options...
wtnhighlander Posted April 8, 2014 Report Share Posted April 8, 2014 Amen. His absence is easily noticed. It has been about 2 weeks since he last posted here. Hope all is well with him. 1 Quote Link to comment Share on other sites More sharing options...
Dave H Posted April 8, 2014 Report Share Posted April 8, 2014 I think I remember his daughter was expecting a while back, that could be the cause for the deafening silence. Quote Link to comment Share on other sites More sharing options...
CessnaPilotBarry Posted April 8, 2014 Report Share Posted April 8, 2014 I also remember he's been bringing some green guys up to speed in his shop. Here's hoping he's just busy! Quote Link to comment Share on other sites More sharing options...
Tpt life Posted April 8, 2014 Report Share Posted April 8, 2014 I tried PM and other contact two weeks ago. Glad other people also noticed. Also hoping he's ok. Quote Link to comment Share on other sites More sharing options...
Llama Posted April 8, 2014 Report Share Posted April 8, 2014 Also been thinking about this. Hope he is ok Quote Link to comment Share on other sites More sharing options...
Guest Posted April 8, 2014 Report Share Posted April 8, 2014 +6 on that. Seems he has a lot going on... new shop, new grandchild, new employees, new E-class and some health issues so hopefully he is just taking a break on a beach somewhere. Quote Link to comment Share on other sites More sharing options...
Eric. Posted April 8, 2014 Report Share Posted April 8, 2014 He's probably lounging on some Caribbean beach paradise in a man thong, sipping daiquiris and reading some novel with Fabio on the cover. He's disappeared for weeks at a time before. My guess is the new grandbaby... 1 Quote Link to comment Share on other sites More sharing options...
pghmyn Posted April 8, 2014 Report Share Posted April 8, 2014 He's probably lounging on some Caribbean beach paradise in a man thong, sipping daiquiris and reading some novel with Fabio on the cover. He's disappeared for weeks at a time before. My guess is the new grandbaby... He came off as more of a cosmopolitan drinker, to me. Quote Link to comment Share on other sites More sharing options...
Boatworks Today Posted April 9, 2014 Report Share Posted April 9, 2014 My guess is either a good single malt, or bourbon.. I suppose door #3 could be tea ? Either way hope all is well ! Quote Link to comment Share on other sites More sharing options...
DaveT Posted April 9, 2014 Report Share Posted April 9, 2014 With all that going on in his life I wouldn't be surprised if he is taking a break somewhere. Here's hoping that's what it is and he returns refreshed and invigorated. Quote Link to comment Share on other sites More sharing options...
Popular Post CT Proctor Posted April 9, 2014 Popular Post Report Share Posted April 9, 2014 Maybe he's looking for his teeth in the DC again. 4 Quote Link to comment Share on other sites More sharing options...
Trip Posted April 9, 2014 Report Share Posted April 9, 2014 ==>Maybe he's looking for his teeth in the DC again You know, that really was one of the funnest posts ever... The very definition of 'you just can't make this stuff up'... Quote Link to comment Share on other sites More sharing options...
Llama Posted April 9, 2014 Report Share Posted April 9, 2014 If someone starts a thread about Shapers he may come back. Just an idea 1 Quote Link to comment Share on other sites More sharing options...
pghmyn Posted April 9, 2014 Report Share Posted April 9, 2014 If someone starts a thread about Shapers he may come back. Just an idea No, it has to be anti-shapers. His sixth sense will tingle. Quote Link to comment Share on other sites More sharing options...
Popular Post Trip Posted April 9, 2014 Popular Post Report Share Posted April 9, 2014 You know, now that you mention it, I was just shopping at Home Depot and saw this amazing Ryobi bench-top router table. I'm thinking shapers are way over-rated... I should just ditch my plans for the 3HP PM shaper and go with a router table... I'm sure it's going to work just as well. Any input? http://www.homedepot.com/p/Ryobi-32-in-x-16-in-Universal-Router-Table-A25RT02/100593231 6 Quote Link to comment Share on other sites More sharing options...
pghmyn Posted April 9, 2014 Report Share Posted April 9, 2014 You know, now that you mention it, I was just shopping at Home Depot and saw this amazing Ryobi bench-top router table. I'm thinking shapers are way over-rated... I should just ditch my plans for the 3HP PM shaper and go with a router table... I'm sure it's going to work just as well. Any input? http://www.homedepot.com/p/Ryobi-32-in-x-16-in-Universal-Router-Table-A25RT02/100593231 Are you going to raise panels with it? Sounds like a great deal! 1 Quote Link to comment Share on other sites More sharing options...
Beechwood Chip Posted April 9, 2014 Report Share Posted April 9, 2014 I'd like to add a power feed to my home made router table. Anyone know where I can find plans? 2 Quote Link to comment Share on other sites More sharing options...
Dan S Posted April 9, 2014 Report Share Posted April 9, 2014 No, it has to be anti-shapers. His sixth sense will tingle. No, you just need to suggest that Routers aren't dangerous when used properly, or that everything from china isn't chunk. 1 Quote Link to comment Share on other sites More sharing options...
pghmyn Posted April 9, 2014 Report Share Posted April 9, 2014 I don't think he's going to talk to us anymore, after this thread. Quote Link to comment Share on other sites More sharing options...
Tpt life Posted April 9, 2014 Report Share Posted April 9, 2014 Maybe he sucked a toupeé off of the wrong man... Quote Link to comment Share on other sites More sharing options...
Freddie Posted April 9, 2014 Report Share Posted April 9, 2014 Im going to spray an entire kitchen set with latex paint through an airbrush. Has anyone tried this? Quote Link to comment Share on other sites More sharing options...
..Kev Posted April 9, 2014 Report Share Posted April 9, 2014 I hired some young kids off the street to help in the shop that turned out to be really good woodworkers! They always put stuff away, don't make a mess, and haven't broken anything.. Quote Link to comment Share on other sites More sharing options...
Janello Posted April 10, 2014 Report Share Posted April 10, 2014 I mounted a 5 HP lawnmower engine under my jesssem router table. 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.