Chad Groenhout Posted April 18, 2014 Report Share Posted April 18, 2014 I bought this saw a few years ago and really like it. I would like to replace the blade and was wondering what a good all around blade? Not high end work, just middle of the road... It is a 10" table saw. Also, if I was to upgrade the fence, what would you guys suggest? Thanks Quote Link to comment Share on other sites More sharing options...
rodger. Posted April 18, 2014 Report Share Posted April 18, 2014 Some good combo blades are out there. Freud premier fusion is a good choice, but it expensive. Check out the diablo line from freud if you were looking for a more economical blade. 1 Quote Link to comment Share on other sites More sharing options...
EdgewaterWW Posted April 18, 2014 Report Share Posted April 18, 2014 I like Irwin-Marples blades 40 or 50 tooth, Here is a posting about "All around saw blade" and a talk about a replacement fence for a Jet, but would also be good info for a Delta 1 Quote Link to comment Share on other sites More sharing options...
jrapwoodworking Posted April 18, 2014 Report Share Posted April 18, 2014 I can't remember the item # but Freud makes a combination rip and cross cut blade. I use it almost exclusively on my table saw. I think it was around $60 and home depot even sells it nowSent from my XT1080 using Tapatalk 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.