T-astragal Posted April 22, 2014 Report Share Posted April 22, 2014 I got these in a package deal. The width is 2" the diameter is 5" but the bore is 35mm. The gibs are unusual and it looks like only 1/4" steel fits. I could have them sleeved for 1 1/4" and use them but I'd like to know a little about them first. Thanks. Steve Quote Link to comment Share on other sites More sharing options...
wdwerker Posted April 22, 2014 Report Share Posted April 22, 2014 I recognize the corrigations. I haven't used them but corrugated knives are offered from many grinding and sharpening services. Where is Particle Board when we need him. It looks like a type of head for a shaper to me. Quote Link to comment Share on other sites More sharing options...
T-astragal Posted April 22, 2014 Author Report Share Posted April 22, 2014 Definitely for a shaper or moulder. These are not quite normal though. The gibs lock differently. Most also accept up to 3/8" thick steel. Steve Quote Link to comment Share on other sites More sharing options...
chopnhack Posted April 22, 2014 Report Share Posted April 22, 2014 Metric bore.... is there a chance that the steel really measures 5mm from the flat side to the corrugation tip? Would it be safe to sleeve them, they might not balance well, no? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.