Dnorris1369 Posted May 16, 2014 Report Share Posted May 16, 2014 Wondering if any of you guys built the wall hanging cabinet. I'm in the process of the build and have a few questions so I don't screw this up. Thanks Sent from my iPad using Tapatalk Quote Link to comment Share on other sites More sharing options...
Tom Crawford Posted May 17, 2014 Report Share Posted May 17, 2014 I did not but suspect others here did. You should post your questions - there are many very knowledgeable embers here and many, even if they did not build it, may be able to help. Quote Link to comment Share on other sites More sharing options...
Dnorris1369 Posted May 17, 2014 Author Report Share Posted May 17, 2014 Good idea I am working on the case and already cut divider and shelf my divider will not be flush with the front how can I tackle this one?? Sent from my iPhone using Tapatalk Quote Link to comment Share on other sites More sharing options...
..Kev Posted May 17, 2014 Report Share Posted May 17, 2014 Assuming it's a little short, add a thin strip to the back of the panel. That should push it forward to be flush and you'll never see it in the back of the panel. Either that or cut a new piece.. Quote Link to comment Share on other sites More sharing options...
Dnorris1369 Posted May 17, 2014 Author Report Share Posted May 17, 2014 Yea thin strip in the back sometimes it's the simplest answers are hardest to think of. Lol. Maybe sign to take a break for a nightSent from my iPhone using Tapatalk Quote Link to comment Share on other sites More sharing options...
..Kev Posted May 17, 2014 Report Share Posted May 17, 2014 Yea thin strip in the back sometimes it's the simplest answers are hardest to think of. Lol. Maybe sign to take a break for a night Sent from my iPhone using Tapatalk All good.. Sometimes all you need is a fresh start and a little time to think.. Quote Link to comment Share on other sites More sharing options...
Dnorris1369 Posted May 27, 2014 Author Report Share Posted May 27, 2014 How thick should the French cleat be to support this?? Sent from my iPhone using Tapatalk Quote Link to comment Share on other sites More sharing options...
Dnorris1369 Posted June 1, 2014 Author Report Share Posted June 1, 2014 Finished it up today. First dovetail project. First frame and panel door. Thanks for the help Marc Sent from my iPhone using Tapatalk Quote Link to comment Share on other sites More sharing options...
..Kev Posted June 1, 2014 Report Share Posted June 1, 2014 Looks great! Quote Link to comment Share on other sites More sharing options...
patriot Posted June 2, 2014 Report Share Posted June 2, 2014 Nice figure on that! Grats on the dovetails and frame and panel doors! Quote Link to comment Share on other sites More sharing options...
bgreenb Posted June 3, 2014 Report Share Posted June 3, 2014 Great job! What did you use for finish? Quote Link to comment Share on other sites More sharing options...
Dnorris1369 Posted June 21, 2014 Author Report Share Posted June 21, 2014 Thanks guys. It was a good feeling accomplishing some new tasks for me. I used general finishes dye stain mixed some medium brown and orange I think it ended up being about 3 parts to one with just a little bit of orange also Sent from my iPhone using Tapatalk Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.