..Kev Posted May 17, 2014 Report Share Posted May 17, 2014 Tenon jig As some of you know, I recently upgraded my table saw and then upgraded the fence on that. That means that none of the old table saw jigs would work with the new fence.. Here's the first one replaced.. The scrap Sapele is a little overkill but, better than burning I suppose.. 3 Quote Link to comment Share on other sites More sharing options...
wdwerker Posted May 17, 2014 Report Share Posted May 17, 2014 Nice new jig ! Looks like you need to try the Bessey auto adjust toggle clamps. It is amazing how they can clamp 1/4" to 1 1/34" thick stock with the same amount of pressure. And you can adjust the amount of pressure easily. Quote Link to comment Share on other sites More sharing options...
..Kev Posted May 17, 2014 Author Report Share Posted May 17, 2014 Nice new jig ! Looks like you need to try the Bessey auto adjust toggle clamps. It is amazing how they can clamp 1/4" to 1 1/34" thick stock with the same amount of pressure. And you can adjust the amount of pressure easily. That's actually what I wanted but, the store I was in this morning didn't have them.. I'll probably replace these in the future. Quote Link to comment Share on other sites More sharing options...
Llama Posted May 17, 2014 Report Share Posted May 17, 2014 Nice work! Quote Link to comment Share on other sites More sharing options...
..Kev Posted May 17, 2014 Author Report Share Posted May 17, 2014 Thanks Mel.. Here's the next jig.. Sacrificial fence to bury a dado blade. Quote Link to comment Share on other sites More sharing options...
JoshC1501 Posted May 17, 2014 Report Share Posted May 17, 2014 This is what I need to do. Trying to get my out feed table done first! Looks good, nice work! Quote Link to comment Share on other sites More sharing options...
..Kev Posted May 18, 2014 Author Report Share Posted May 18, 2014 Thanks, stay tuned, one more coming today.. Got sidetracked with a watering table for the neighbor... Quote Link to comment Share on other sites More sharing options...
..Kev Posted May 18, 2014 Author Report Share Posted May 18, 2014 Ok, just finished up the last one.. New spline jig was definitely in order! I think 4 projects in one day was a bit too much... Heading out to enjoy a nice fire and a cold beverage! 1 Quote Link to comment Share on other sites More sharing options...
Byrdie Posted May 18, 2014 Report Share Posted May 18, 2014 Nice timing. I already have a spline jig but I just bought the hardboard Friday to make a taller/sacrificial fence for my TS. I have a bunch of dados to cut for a tongue & groove piece I'm working on. Quote Link to comment Share on other sites More sharing options...
Tpt life Posted May 18, 2014 Report Share Posted May 18, 2014 Well deserved! Quote Link to comment Share on other sites More sharing options...
..Kev Posted May 18, 2014 Author Report Share Posted May 18, 2014 Thanks guys.. I feel much better having the jigs built! Fire was warm, beverages were cold, and the company was awesome! All in all, just about a perfect day! Quote Link to comment Share on other sites More sharing options...
Llama Posted May 18, 2014 Report Share Posted May 18, 2014 Now I have jig envy. 1 Quote Link to comment Share on other sites More sharing options...
TerryMcK Posted May 18, 2014 Report Share Posted May 18, 2014 You were real busy today Kev. Nice work on all the jigs. Quote Link to comment Share on other sites More sharing options...
chrisphr Posted May 19, 2014 Report Share Posted May 19, 2014 Cool jigs! It don't have too be fine furniture for it to be fun to build. Quote Link to comment Share on other sites More sharing options...
wdwerker Posted May 19, 2014 Report Share Posted May 19, 2014 Gettin jiggy with it ? 1 Quote Link to comment Share on other sites More sharing options...
G S Haydon Posted May 19, 2014 Report Share Posted May 19, 2014 In just over 12 months of being part of the forum this is perhaps the first visit to this area! Sweet job TIODS. A very clean and tidy job. Quote Link to comment Share on other sites More sharing options...
..Kev Posted May 19, 2014 Author Report Share Posted May 19, 2014 Thanks G Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.