Rikon 10-325 14" Bandsaw

[Tom Cancelleri]

I'm upgrading my bandsaw, and this one has to go. It doesn't have any heavy use on it. Did some light resawing, and cut lots of curves with it.

 

Make: Rikon

Model: 10-325 14" Deluxe Bandsaw

 

Includes:

• 111" Blades

1. Timberwolf 1/4" 6tpi
2. Timberwolf 1/4" 4tpi
3. Timberwolf 3/16" 4tpi
4. Timberwolf 3/4" 2-3 Skip tooth
5. Timberwolf 3/8" 3tpi Alternating Set blade for softwoods and greenwoods
6. Olson 1/4" 10tpi (I think)
7. Stock 5/8" blade that I used once

• Carter Blade Stabilizer for scroll work and tight curve cutting
• Mobile Base

 

Saw currently sells for $899 before tax at Woodcraft. I'm including all the blades, Carter stabilizer, and mobile base

 

Asking $800 for everything ($825 and you get 2 boxes of 125mm Festool Rubin paper with it. 100 & 150 grit 95 pieces total, a few were used)

 

Machine is tuned up and immaculate. It's approximately 15 months old. 

 

Located in Northern Virginia ( I can/will not ship this )

 

 

 

 

 

 

[Jfitz]

If I didn't already have that saw and was local.....

 

Are you upgrading to the Laguna?  Staying with 14" or going larger?

[Tom Cancelleri]

When I originally bought this I had wanted the 1412 however it wasn't available at the time and Laguna had no eta on the release. I needed a bandsaw to cut bowl blanks to rough shape so I bought the Rikon. 6 months later the Laguna came out, and I decided I wanted to get the saw I originally wanted. I thought about going bigger, however I don't necessarily have the room or need for an 17+ inch bandsaw.

[Jfitz]

I hear ya.  The SUV was out of my price range when I was looking, so I settled on the Rikon.  Does all I expected it to, but I wish the 1412 was available at that point.