walnut_weasel Posted August 20, 2015 Report Share Posted August 20, 2015 I pre-finished the interior surfaces of a small cabinet I am building with Arm-r-seal. I now have it assembled and am ready to finish the exterior surfaces. Is there anything I should be careful of where the pre-finished surfaces meet the raw wood - i.e. will there be a noticeable line/sag where the fresh Arm-r-seal meets the old Arm-r-seal on the interior surfaces? The corners have a radius so there is not a sharp line breaking the surfaces.Thanks in advance! Quote Link to comment Share on other sites More sharing options...
wdwerker Posted August 20, 2015 Report Share Posted August 20, 2015 Not sure but I would do a test on some scrap or an inconspicuous place . More risk if stained, less risk with just a clear finish. 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.