Sergiy Drabott Posted August 30, 2015 Report Share Posted August 30, 2015 Wondering what everyone uses, i like Amana tool bits but maybe there is one that does flush trim and bevel at the same time?Apreciate any response. Serge. Quote Link to comment Share on other sites More sharing options...
wdwerker Posted August 30, 2015 Report Share Posted August 30, 2015 The Euro Square Bearing bits don't leave any marks or get clogged up with contact cement. It's just flush trim . I use a seperate bit and router for beveling.Otherwise you have to keep resetting back and forth.If you use a metal bearing a trick is to rub the excess contact cement off with one of those crepe rubber blocks used for cleaning belt and drum sander abrasive.Freud, Amana and CMT all make good bevel and flush trim combo bits. "No File" is another version that leaves a slightly rounded corner that isn't sharp. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.