Popular Post rmartuszewski Posted January 16, 2016 Popular Post Report Share Posted January 16, 2016 Made from scraps. 3/4" birch ply, 3/4" plywood, shop fox t slots, MDF fence, Incra T-bolts and knobs. And dado for hardboard replaceable inserts. 3 Quote Link to comment Share on other sites More sharing options...
wtnhighlander Posted January 16, 2016 Report Share Posted January 16, 2016 Nice table! How do you plan to use the T-track? Quote Link to comment Share on other sites More sharing options...
rodger. Posted January 16, 2016 Report Share Posted January 16, 2016 looks handy Quote Link to comment Share on other sites More sharing options...
Brendon_t Posted January 16, 2016 Report Share Posted January 16, 2016 I have often wanted a T-track going side to side for clamps. And the removable backer will be nice How did your new table connect to the post, or is it attached to the old table? Quote Link to comment Share on other sites More sharing options...
rmartuszewski Posted January 16, 2016 Author Report Share Posted January 16, 2016 The outside t-tracks are just for the fence. May put some new ones in closer to center for clamping. I find I never clamp...lazy lol. The table is bolted through holes with washers to metal table. Made it thick so stays flat even with t-tracks dado into table. Only use for small things, have a straight center guide for hand drill when drilling larger pieces. For raising and lowering with drill. Quote Link to comment Share on other sites More sharing options...
prov163 Posted January 19, 2016 Report Share Posted January 19, 2016 Nicely done! Keep saying I'm going to build one. Like the simplicity of yours. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.