izan Posted May 27, 2016 Report Share Posted May 27, 2016 (edited) Hello friends, I would buy a machine capable of making pool cues . The size of the pool cues are as follows : length of 4.54 ft diameter from one end 0.59in diameter of the opposite end 1.18in The pool cue should be done in a single piece. Do you know a machine that it can make these pool cues. Thank you, my friends. Edited May 27, 2016 by izan insert a picture Quote Link to comment Share on other sites More sharing options...
Woodenskye Posted May 27, 2016 Report Share Posted May 27, 2016 Welcome to the forum. I would say a lathe if you could find one that big between centers. The other option is the muscle you have and a sharp spokeshave. I used to have many pool cues that were 2 pieces and they all worked fine. Quote Link to comment Share on other sites More sharing options...
wtnhighlander Posted May 28, 2016 Report Share Posted May 28, 2016 Not to hijack, but does anyone know a source for the threaded connector used in 2-piece cues? Quote Link to comment Share on other sites More sharing options...
Dylder Posted May 28, 2016 Report Share Posted May 28, 2016 http://www.muellers.com/Joint-Pins-and-Inserts.html Muellers has the supplies. I believe cue makers use a metal lathe. There are special cue lathes to do shaft work and linen wraps. Good luck if you take up cue making. A good custom cue is a work of art. I use Schon & Viking cues. 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.