Popular Post difalkner Posted June 25, 2016 Popular Post Report Share Posted June 25, 2016 This is a project I started about two years ago before I restored my table saw so most of this was built using a bandsaw, router, Dremel, and scroll saw. Like a lot of projects this one was sidelined for more important and/or urgent ones. A couple of weeks ago I was waiting on my laser guy to cut some letters for my guitar logo and while I was waiting I thought it was a good time to complete this iPad stand. I'll probably fly through the build process 'cause there's nothing really new here but I think it's a good mix of woods and I had fun with the design, so here goes... On stage at church my iPad resides on a standard metal music stand and I wanted something smaller. Making something to look better was a goal, as well but a black metal stand isn't hard to beat. I had made a little support out of scraps so the cable would be protected (truly fine woodworking, too! ) My choice of wood was Curly Maple and unsteamed Walnut. I resawed some Curly Maple and glued the pieces (the notch was due to my original design that changed several times and didn't really need to be there but since I cut it out I had to live with it) - Like my iPhone stand I built a while back this one is shaped like a guitar – Original design for back side (congregation view) – Original design for front (my view) – My original design incorporated a volute similar to what Martin uses on the back of the guitar neck but I decided not to do it this way – I probably went through 20 designs for the legs before arriving at what I finally used – The music notes go all the way through the legs and were cut on my scroll saw – The music staff lines are Macassar Ebony and the pockets were cut with my Dremel on a base – Ebony inlaid and ready for trimming – Trimmed and sanded – Checking the fit on the legs and Walnut column (attached with a 1/4x20 screw from under the feet) – Showing the effect of being cut all the way through and letting light define the note – Beginning the inlay with Curly Koa and Macassar Ebony – Starting the inlay gluing – Fitting the final pieces of Ebony – Primary inlay complete – Bloodwood ring cut for perimeter of ‘soundhole’ inlay – In order to cut the pocket for the ring I had to drill through the Ebony I had just inlaid for the Dremel circle cutting fixture. That meant I had to patch the 3/16” hole with more Ebony but it came out pretty good. Ring inlaid – Setup for cutting the pocket for the cross, which will also be Curly Maple – Cross pocket cut – Inlay complete with Maple cross – Ebony dust and CA glue to fill the gaps – Inlay complete and gaps filled – Based on the way the iPad will rest on the supports I needed a way to keep it from sliding off and also a way to get the cable up from the bottom. This meant it had to be an open design and not interfere with the cable so I carved a little Calvary cross scene with mountains. Before I finished it I took some Ebony and Walnut dust and rubbed into the mountains to get it a little depth and shading, not much but just a tiny bit. This is also Curly Maple – Some of the pieces – Close shot of the completed soundhole inlay – Calvary carving close shot – The upper section is fastened with a #10 machine screw into a threaded insert on the Walnut column but I didn’t want the screw showing so I made a Maple cover and it snaps into place with a rare-earth magnet. The little Maple shelf the cover is setting on is for my capo, picks, etc. The cover looks nice and is quickly and easily removable if needed – Finished stand and iPad – The vertical piece of the cross is glued in place and is actually structural and goes well down into the mount. The cross piece is for looks and is floating, only attached to the vertical piece but not the guitar shape. View for the congregation – My view without the iPad – Ask whatever questions you may have ‘cause I’m certain I skipped some steps in this posting. Hope y’all enjoy this little project! David 7 Quote Link to comment Share on other sites More sharing options...
difalkner Posted June 25, 2016 Author Report Share Posted June 25, 2016 We had band practice tonight and I had the opportunity to see how it works on stage. I think I might cut a few inches off the height and drop it a bit but I'll use it like this for a couple of weeks to be sure. Btw, I made the black stand for the 22” monitor and also the Cajon (box drum) in the back by my Koa guitar. My view of the stand – Congregation view – Quote Link to comment Share on other sites More sharing options...
..Kev Posted June 25, 2016 Report Share Posted June 25, 2016 Super attention to detail! Awesome work! 1 Quote Link to comment Share on other sites More sharing options...
shaneymack Posted June 25, 2016 Report Share Posted June 25, 2016 What a fantastic job ! Beautiful woods, great design, perfect execution. Two thumbs up ! Sent from my SM-N910W8 using Tapatalk 1 Quote Link to comment Share on other sites More sharing options...
difalkner Posted June 25, 2016 Author Report Share Posted June 25, 2016 4 minutes ago, TIODS said: Super attention to detail! Awesome work! Thank you! It was a lot of fun to design and build. Quote Link to comment Share on other sites More sharing options...
Chet Posted June 25, 2016 Report Share Posted June 25, 2016 That came out real nice. Great work. 1 Quote Link to comment Share on other sites More sharing options...
wtnhighlander Posted June 25, 2016 Report Share Posted June 25, 2016 Very nice, David! I like the fact that you put such effort into the 'user' side, even though it is covered much of the time. 1 Quote Link to comment Share on other sites More sharing options...
JosephThomas Posted June 25, 2016 Report Share Posted June 25, 2016 Cool stuff David, thanks for sharing Sent from my Nexus 5 using Tapatalk 1 Quote Link to comment Share on other sites More sharing options...
Unknown craftsman Posted June 25, 2016 Report Share Posted June 25, 2016 Very creative precise work.Thanks for sharing. Aj 1 Quote Link to comment Share on other sites More sharing options...
Ronn W Posted June 25, 2016 Report Share Posted June 25, 2016 Wonderful work. I like it. 1 Quote Link to comment Share on other sites More sharing options...
difalkner Posted June 25, 2016 Author Report Share Posted June 25, 2016 Thanks to everyone! I had fun designing and building this stand. Now I need to use it a few weeks and see if I like it. Quote Link to comment Share on other sites More sharing options...
Janello Posted June 26, 2016 Report Share Posted June 26, 2016 Very nice. Top to bottom it looks great! 1 Quote Link to comment Share on other sites More sharing options...
Coop Posted June 27, 2016 Report Share Posted June 27, 2016 Fantastic job. Both the design and the woodworking are very well done! 1 Quote Link to comment Share on other sites More sharing options...
difalkner Posted June 27, 2016 Author Report Share Posted June 27, 2016 Thanks, Guys! I had the pleasure of using it twice today in morning and evening services at church and it worked out pretty good. I thought it was going to be too tall but for now it's not too bad. 1 Quote Link to comment Share on other sites More sharing options...
JohnDe Posted July 20, 2016 Report Share Posted July 20, 2016 Very creative and professionally done! I really like the leg treatment with the inlays and the note cut out. The wood choice and the shapes you use play nice off each other. Nice job! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.