Popular Post wdwerker Posted February 21, 2017 Popular Post Report Share Posted February 21, 2017 Fits most of my machines with the small tool end that's included. The larger size end fits my DW611 router and my TS75 tracksaw. The heavy rubber hose is very flexible and stretchy. My Festool hose is stiff enough to hinder routing on all 4 sides of a part. Both ends of the hose swivel easily so no binding. The large end fits my CT26 and my Ridgid vac too. They also have a smaller and larger tool ends . The hose stretches from about 3' to 13' then retracts without pulling so hard the router tips over. The cord and hose holder is quite well made. The bench clamp end is made of heavy steel and opens to around 3" for thick tops. The post is 40" tall and the hose holder adjusts easily with a large knob. A few Velcro wraps for the cord to the hose will tidy things up. I have only done some test cuts so far but will give it a thorough workout later this week. 3 Quote Link to comment Share on other sites More sharing options...
rbs Posted February 21, 2017 Report Share Posted February 21, 2017 I bought this kit also thinking it would fit my Kreg K5 and my Makita sander and no on both. Had to buy another adapter for both. Also the hook up for the vacume won't fit my big ridgid vac and I need a adapter for that also. I just used tape to connect for now. I do like the hook ups and the hose tho Quote Link to comment Share on other sites More sharing options...
Chet Posted February 21, 2017 Report Share Posted February 21, 2017 Thanks for the review Steve. I have been looking at this set up off and on for a while now. I think this has convinced me. Quote Link to comment Share on other sites More sharing options...
Just Bob Posted February 21, 2017 Report Share Posted February 21, 2017 Perfect timing! I have looking for a solution to my hose and cord problem. Quote Link to comment Share on other sites More sharing options...
bleedinblue Posted February 22, 2017 Report Share Posted February 22, 2017 I didn't know the cord and hose holder was a thing. It's definitely going on the list. I have the small port hose adapter kit and I like it too. It's fit about everything I've needed it for, mostly my Dewalt and Bosch sanders and my Domino. I noticed in a sales flyer recently that they sell what amounts to an expansion pack, that has a couple of additional sized adapters to add to the kit. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.