Spline Jig Sketchup Drawing


Roger T

Recommended Posts

Since I asked for this forum, I figured I had best contribute to it.

Anyway, here is the spline jig that I made a few weeks back. I had found a basic plan on the Web, but could not locate it again, so I have done it in Sketchup.

The fence is movable, and is secured with a couple of small clamps. I did not draw the runners for the tablesaw, as each saw is different and uses different measurements for the slots. The jig should be centered between the 2 innermost supports when you attach the runners.

I cannot take credit for the design, only the SU drawing.

Roger

Spline Jig RO.skp

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.