I’ve gone to to their website WAY more than you can imagine. They probably think I’m a stalker If they are tracking! I have also gone to the manufacturer, Lyndon Furnitures site.
They advertise it as it as a Flare Leg console so I don’t think it’s the pic distortion. I made this a few years back but the legs and flare, in this case upside down, don’t have enough meat for the size of the project.
@Coop- on their website, they say this unit is 64" wide, so I'd say those legs are 1-3/4" to 2" on the front face. I'm not sure the legs taper "out" at all - that might be distortion in the pic. I think maybe the outside edge is straight and there is just a taper on the inside of the leg, below the carcase - seems like that would be consistent with Shaker style. Best guess is it tapers to about 5/8 of the width of the leg. Looks like the legs are ~4" long.
Opinions please! I’m bad on proportions. From the pic above, give me some ideas on the leg width before the taper. From zooming in and measuring with a rule, comparing it to the 3/4” side of the case it’s attached to, I’m thinking 2.25”, which seems like a lot. How far do the leg tapers out. Thanks