This table works brilliantly for me. It is about 4 feet away from my table saw (same height) So it works well as an in-feed tale as well. I made a crosscut sled a while back but find the MFT is far safer and more accurate. It is about 4 inches deep internally so accepts festool clamps. The internal frame is broken into 4 compartments. The top is 1/4 inch proud of the edges. I cut the top into 2 4 x 4 feet pieces which makes it easy to lift out and clean any rubbish (or screws, bolts etc.) that falls down the 20mm holes.