Leaderboard

Popular Content

Showing content with the highest reputation since 09/20/19 in Posts

  1. This project was for me. It's a tall desk with a partially sloped top and shelf for computer monitors. Been working on this since before Christmas. I used a story stick for the legs - worked great.
    19 points
  2. This was turned from a single piece of cocobolo 8 ½” square by 17/4. The surface is sanded to P1200, but with no coatings, just au naturale. With successive convolved designs I have been looking at what happens when the contour lines of the upright and basin are altered. With Sedona the upright and basin are both formed from straight lines. In many ways this shape was the most difficult convolved form to design, engineer and make that I have done so far. For one thing I had to be very particular about the acute angle in the corners. It’s about 40 degrees reflecting the fact that my d
    18 points
  3. My DIL has a sister (lives on the other side of the country) who is an extremely unfit parent, so they have taken on legal guardianship of he 7 YO son. So now I am his defacto grandfather. His other grandfather is a turd and has nothing to do with the boy. Anyway, they are camping with us and we went on a hike. He's never been camping or hiking and is loving it. We've really hit it off and enjoy each other's company a lot. Poor kid has been through a lot and it's going to take a lot of time and love to make things right. But he's a great kid and sure wants to belong to a family
    17 points
  4. About a year ago I read Nick Offerman's book. It's a pretty fun read if you have not read it. In that book, he has a picture of a table designed and built by George Nakashima. It's this picture: When I saw that picture I was immediately smitten with this design. To my eye this table is somehow both complex and simple at the same time. I knew when I saw the table I needed it on my todo list. I could not start on the table right away. I had to remodel our kitchen which took an incredible amount of time. I had to build some shelves. I also built a small counter top for our laundr
    16 points
  5. I started a new project/adventure yesterday. Of the four, my 10 year old grand daughter is the grand kid that has always shown the desire to learn woodworking, she is also the youngest. The intelligent questions that come out of her mouth can stun a college professor. So I decided to ask her what she would like to build, you know bird house, napkin holder, those kind of things. Nope, that wasn't going to work, she said with no hesitation I want to build a coffee table for my mom and dad. So that is the project. We spent some time looking at pictures of coffee tables on the internet
    16 points
  6. A fun project for my Grandson.
    16 points
  7. This month I was one of the turners featured in the Members Gallery of American Woodturner magazine. I know it's not the "Nobel Prize for Woodworking", but still pretty cool to me.
    16 points
  8. I liked Marc's breadbox build very much. Alison liked most of it. We compromised and below is the result. Air-dried walnut with ambrosia maple door and drawer, with ebony pulls.
    16 points
  9. A number of years ago, I built my wife a computer desk of white oak with some storage. But it took up and enormous amount of room. Since she's not around to use it any more, I figured I could simplify the space and still have access to the computer. I use her computer for background music when I doing house things. You know, dishes, vacuum, read and sketch stuff. So I built this little table , that might be called an entry table or sofa table. It's made from "very" soft Maple. It's so soft, it made me think that Pine was a hardwood. This Maple is curly, and has a bunch of Sp[alting and
    15 points
  10. I have had this drawer cabinet under my saw for three years and over time have decided that I wasn't totally happy with how it was working out and it also created a bit of a knuckle scrapper when using the hand wheel to adjust the blade tilt on the saw. So after seeing a blade storage idea that I really liked on another forum I decided it was time to start fresh and replace the old one. The old one had three drawers with ridge foam insulation that had been routed out to hold blades and other fixtures and tools. The new one also has three drawers, with one drawer at this time, with nothi
    15 points
  11. Finally home from a long work road trip! Had some catching up to do! A few projects to get done that have been piling up! Only the bathroom vanity was done for YouTube.. 1. Table Lazy Susan and a cutting board for 2 different clients.. 2. A thread storage cabinet for my wife's quilting room 3. Bathroom Vanity for a client. 4. And, a floating picture frame for a family member..
    15 points
  12. I thought that the build might begin with preparing the panels, since there has been some interest in the past shown in the shorter Hammer K3 sliders. Mine has a 49" long slider and a 31" wide table for the rip fence. The build is an entry hall table for a wedding present for a niece. Her choice was this mid century modern piece, which will be the basis for the build. My job is to re-invent it somewhat. She wants Jarrah, and I have managed to find something spectacular ... a subtle fiddleback (curly) set of boards that will make a book match (as they are only about 9" wide eac
    14 points
  13. I know I didn’t know what one was either, it’s a fancy board for cheese, meat, veggies and dip, crackers, used for when friends or family get together. This one is for my wife’s birthday, Hard Maple and Sapele with box joints on the ends and bent lamination strips down the middle, thanks for looking guys
    14 points
  14. Yeah so I'm supposed to be working on dining chairs. My excuse was I needed to get material before i could progress on the project but in reality I really wanted to make something for my shop. So while i waited for a chance to get a lumber order into my schedule I grabbed a bunch of the 8/4 cherry i got a good deal on.Why cherry? Because everyone does maple and I want to do something different.. ( I also got the cherry for a steal. I didn't want to be wasteful with the lumber and the boards I had were odd widths. Everything was 7-7/8" wide which is frustrating. So i ripped half the boar
    14 points
  15. 4 file drawers and 2 small on top. Yet to come an 8/4 walnut top.. Then open shelves above...And another 8/4 top above the shelves... Panels are mill run fas walnut book matched. First project with my new Jessem. Very user friendly.And powerful with a 3.25hp porter cable.
    14 points
  16. I made this bench for my mechanic, in payment for some auotmobile work I needed done. I made a profit from that trade. Curly Cherry and a live edge.
    14 points
  17. Finished! The bed is based on the Greene and Greene bed in the Gamble house. The house and the furniture were designed a built by the brothers. I did a modification to the foot board, because I'm 6' tall and tall foot boards are bothersome. Finished with shellac and wax. African Mahogany, Gaboon veneered center panel, and Danizia pegs and splines. I used the plans by Martin McClendon from FWW Jan/Feb 2013. I really liked that he used six spindles on each side for the queen sized bed, four just don't look right to me. Happy 4th! Sorry not a full project journal.
    13 points
  18. Alright, I have not been hiding, I've been varnishing my a*% off. Four coats top and four coats bottom after a lot of fairing and sanding of the epoxy base. After varnishing, on went the additions that make the boat complete. Here are the pics; Ready for the water, fully rigged and set up, just need to add the float bag for the front compartment; Handmade walnut handles drilled thru hull; Front bungee cords, left them a little long to see how it goes; Bungee cords again and hatch behind the cockpit; Hatch in place and off, you can see the
    13 points
  19. As I've promised I'm going to journal my next Maloof Rocker build. This is one of my favorite all time builds and this will be my 5th rocker in the past 2 years (third rocker of this year). I started building chairs about 4 years ago and it has become an obsession to me. During that time period I've built approx 30 chairs. I've learned a lot along the way. For all those who have been wanting to start this build I'd encourage you to get started, it is a challenging but immensely satisfying build. Since this is a guild project I'll be following basically Marc's instructions and I'll point o
    13 points
  20. Okay, the last day started off by attaching the figure 8's to the base. Then center punching for the screw hole in the top. Then drilling and pre-threading the holes in the top. A final vacuuming of the parts before finishing. This next step is were she really left me impressed. I thought this is were she would have some struggles but after practicing the spray process on some spare plywood. I was real amazed at the job she did on the actual top. She was just a little nervous and asked me to spray the base. Spraying the bottom of the top.
    13 points
  21. This took 7 months to get to me.
    13 points
  22. I'm exhausted from taking care of her as she grew weaker this past week, but sleep won't come. She deserved someone much better than me, but put up with me all these years. A couple weeks ago I started thinking about Richard going through the same thing, so I messaged him a few times. Thanks to everyone for the thoughts and prayers.
    13 points
  23. I finally finished with this project. The top is made from a single piece of butternut and the bottom is made from a block of wood that was labelled English walnut, but turned out to be teak. This was the blank I asked about in the Wood section and @phinds was kind enough to evaluate. @Chestnut, I know you particularly wanted to see the figure, but after turning and sculpting there's almost nothing left of the indented grain pattern. There is a little visible in the right hand pillar of the first two photo's.
    13 points
  24. I got finish applied. I did 3 coats total on all the base parts for the table and benches. For the seats of the benches and the table top I put down 5 coats. The wood dents fairly easily so I'm a bit concerned on the long term durability. Beings this is for my sister I'm goign to tell her to use it hard and if I need to make a new top for it someday that will not be a problem. Hopefully it fares better than I'm expecting and will just get little dents and scratches giving it good character instead. Table top thickness at 11/16" looks pretty good all things considered. I was a bit wo
    13 points
  25. Ok, @Spanky got me going to finish up this post. I had put my last coat of finish on the Rocker yesterday and so I went home at lunch to move it into the house and grab some pics. When I left off here I had to do the final sanding of the rockers and lower legs. Then it was wet down the whole rocker to raise the grain and then resand the whole rocker. Dye was applied next and again I had to resand the whole rocker! Once those very joyless tasks were completed I got to apply the finish and then for the first time see what this wood had to offer. Well it didn't disappoint, God made some bea
    13 points
  26. Been working as a Christmas Elf for the past few weeks, trying to think up some simple gifts. Made some candleholders, a few bigger pieces of furniture, some boxes based on @gee-dub continuous grain boxes, great link here... But @Gary Beasley got me thinking when he was begging for slabs from @Spanky to make some bowls. Well I'm not much of a bowl turner, but with the development of my sculpting skills I thought this might be a great gift idea. Went out to my drying piles where slabs hold down the roofing, lean against the back of a drying shed, and a few extra ones are lying aroun
    13 points
  27. I've been a little quiet on here lately. Since going back to the dental office, I've had 3 months of patients backed up. This has really cut into my free time so I'm needing this project to give me some sanity. After I finished my SUP (which I documented on here) in April, I had enough time and wood to build a second one before going back to work. They have gotten a lot of use since then, and their success got me wondering about building a Kayak (which might turn into plural in the future). So after doing the research, I decided to go the kit route. The kit will include instructions, glas
    12 points
  28. I've reached a tipping point with living with my 6" jointer and an upgrade has moved to the top of the tool priority list. I'm in a small basement shop so getting a big jointer in there is not realistic. A combo machine doesn't suit my workflow. So really the only option I have would be to build one myself, ala Matthias Wandel and John Heisz. Their builds used a cutterhead from a lunchbox planer. Matthias also used the motor from the planer, John used an induction motor. They both made the tables out of plywood skinned with thick sheet metal. That's the part that I really had misgivings
    12 points
  29. Quick update, the strip deck is just about completed. A lot of fiddling to get the pieces to fit and you really can do all of this by hand. I've been using a handsaw, block plane and rasps to fit together the strips. Here's were I'm at right now, hope to finish up the deck by the end of the weekend. Stern is pretty much done, 2 very small sections need to be filled in but I'll do that once I take the deck off for glassing; Bow is coming along; To fit together the pieces you need to cut your angles and make a cove where one is needed, rat tail rasp works great;
    12 points
  30. Only because I didn't want to disappoint you, Ken, I used mesquite for trim on the doors and stiles. And to top it off, I used Lone Star pulls.
    12 points
  31. 30 bdft of quartersawn white oak and 10bdft of maple from Bell Forest.
    12 points
  32. Made this one out of Red Gum for the granddaughter, hidden behind the drawer is a musical movement that starts and stops when the drawer is opened, the movement is from http://www.themusichouse.com , if you haven't had a chance to make a music box these are the best people to deal with, awesome folks and a wide selection of movements. not continuous grain all around just 3 corners, the wood is a little thick for my taste but this stuff warps pretty easy and i was getting some bad chip out on the planer so i quit while i was ahead. the drawer box is Sapele, finish is ARS, 3 coats, as always tha
    12 points
  33. Sandy listens to Ray Comfort and Kirk Cameron (www.livingwaters.com) sharing the Gospel every Saturday morning on YouTube while she makes our salads for the week so I made a passive speaker for her iPhone (and for her birthday). Curly Maple, Gaboon Ebony, and Curly Redwood, French polish finish. The difference in sound is very obvious - it’s richer, more balanced, and a little louder. Cold bending the Curly Redwood; I resawed to the point I needed and then soaked it in hot water. After three times and bending successfully more each time I cut the pieces I needed and then glued them toget
    12 points
  34. I posted a few photos of this project in progress in the What did you do today thread, but thought I'd post a few of the finished piece here. The table top is a veneered (shop sawn) mesquite breadboard with ebony accents. I made it first so that the finish could have a long cure time while I built the base. Once that was done I started on the base while I waited for the leather straps to come. I did all the M&T joinery on the PantoRouter - made very quick work of it and very accurate. Then it was
    12 points
  35. Today this flew into the shop
    12 points
  36. Speaking of projects to make the wife happy, I finished up the crown molding on our first floor yesterday. Had a bit of a break since I started since we had our deck built in the middle. Old deck New deck
    12 points
  37. OK, I love project journals, and now that I've had to close my dental office for the unforseen future, I'd thought I'd contribute to the forum again with a build. This has been a build on my list for a while. Sort of been putting it off since it's a big build, over 11 feet long. Had to build a plywood benchtop to go over my work bench and a lot of prep work needed to get the frame correct. Hopefully when this whole thing is over I'll get a chance to enjoy this build. I'll be using red cedar and paulownia for this build. The frame is made from 1/4" ply. I've had the pattern printed for a
    12 points
  38. Got a call from the camera store that I built the lens case for (two years ago). He wants 3 more.
    12 points
  39. I started this Morris Chair project about 3 weeks back. I wasn't really planning on doing a detailed journal, but I have been taking photos along the way and thought I would share them here. I am making this out of Sapele. When I first started thinking about this project 3 or 4 years back I was planning on doing it in Quarter Sawn White Oak but for some reason the lumber yards around here aren't carrying much 8/4 inventory. They are nice enough to offer to order what I need but this does give me an opportunity to select my pieces. I have done some other projects in Sapele and have rea
    12 points
  40. For those of us that do believe, I wish each and everyone of you a very Merry Christmas!!! For those of you that are unsure, to you I hope the holiday off finds you well and happy.!
    12 points
  41. Just spent a very enjoyable few hours with @Ronn W when he stopped by on his way to Marc Adams woodworking school in Indiana. A great bowl of chili and some homemade sourdough bread with cupcakes for desert. Lots of great conversation covering all topics but mostly woodworking, thanks for coming by Ronn it was a great time and good to see you again.
    12 points
  42. Been busy on this but haven't updated because I've been too busy to transfer images and what not. This will be a longer post. I also missed some picture so sorry if it's word heavy and not picture heavy. So i got the sides cut and sanded a while ago, then i got an order for 8 of those game boards i make so i dropped everything and batched those out. I spray them with the HVLP and i HATE doing that in my shop. Coming back to the table I needed to get a top and bottom rail for the ends and make a way to hold everything in the shape that i want it to. The sides are like an accordion so
    12 points
  43. I made this Sepele box because I wanted to try some different ideas. The top is shaped with a spoke shave, the indent in the lid was done with a core box bit and the the joint for the dividers in the box was done with a vee groove bit. I had seem Matt Kenney do this and thought it looked a little more elegant then a regular dado and the angles match the angles of the mitered corners. The lid handles are Wenge. The finish is one coat of blonde de-waxed shellac and a top coat of EnduroVar. Vee Groove detail. This seco
    11 points
  44. I went for a first ride, finally! So much fun!
    11 points
  45. My daughter is in town. We went up to the nearest DQ for my now 13-year-old pup's birthday. Maggie got her own burger and her own ice cream cone! Then we headed home for ribs and margaritas. The weather was perfect.
    11 points
  46. A super bandsaw box tutorial, watched this and was making boxes in a flash. Great technique if you haven't seen it before. https://www.finewoodworking.com/2016/06/07/episode-1-introduction-make-beautiful-bandsawn-boxes I grabbed a few chunks of wood and instant boxes; Thanks for looking.
    11 points
  47. Built this for my grandson, he needed someplace to keep his wallet, watch, coins or whatever, walnut and butternut, I made the box joints long and tapered them from top to bottom, not much taper only 1/4” should have been more, hidden drawer on the bottom back held in with rare earth magnets, this is # 2 with 2 more to go, thanks for looking and as usual comments or questions are always welcome
    11 points
  48. Final finishing went smoothly. It was a nice change to shift from production woodworking to finishing. I don't know when or how the chairs got banged around so much but there were a LOT of dents I never knew I caused until I started finishing. Some of the dents and dings I didn't see until it was too late so the chairs already have some wear and tear on them. This isn't a bad thing imo they are goign to be well used and loved with the character. I put 4 coats on the entire chair and seat of my go to wipe on poly finish. I've had good luck with this finish on the dining able that the
    11 points
  49. I've been away from the workshop for a month, travelling around a few cities in Austria and Germany, as well as Prague. It was a good trip, but it's great to be home. The current build was on hold. This is the entry hall table my niece asked me to build ... ... and this is where we left off last time - ready to fit the first corner ... Past builds: Part 1: http://www.inthewoodshop.com/Furniture/EntryHallTableForANiece1.html Part 2: http://www.inthewoodshop.com/Furniture/EntryHallTableForANiece2.html Today we shall put the complete case together. What I wis
    11 points
  50. Short update, only spent a little time in shop and have a busy weekend, so here's where I'm at. Finished shaping, sculpting all leg to seat joints. Sanded to 180 but I still have a few scratches to work out. also need to put plugs in and work those areas. Front leg area the tougher than the back area. Cannot be shy or hesitant, there is a lot of material to remove in the front leg to seat joint area; You can see here I have a little less width in the leg at the joint than above or below joint, I'll need to work on that; Also started rounding the underside of the fron
    11 points