RichardA

Supporters
  • Content Count

    5736
  • Joined

  • Last visited

  • Days Won

    37

Everything posted by RichardA

  1. Not gonna try to prove you wrong. If prices exceed $100, then they do. I haven't been on Ebay for quite awhile. And have no need to check.
  2. So, you're over by Denham Springs are you? I lived for almost 20 years in Washington Parish, Our girlfriend Katrina and a couple others shortly after ran my wife and I outa there. I sure do miss the food.
  3. I think you'll see that that post is nearly 10 years old.
  4. I don't normally carry a knife to do that with. And I don't think the barrel of the 9mm I carry will lift that tape.
  5. Sorry JOJO, but Brendon hasn't been on site in well over a year.
  6. It also makes your cuts less erratic. Almost as if they were planned.
  7. That post is over 5 years old, and he hasn't been on this site for years.
  8. Freehand is only for when you can't use a template. And you could have on a flat surface.
  9. I've tried using the shop vac I use in the house because of his hair. He puts up with it for a couple of minutes, then he wants to stick his nose in the hose. I need his loose hair in the vac, not his snot.
  10. He's not running out of calendar, he's running out of the house. Sharon's got a to do list for him, that he can't finish if he lives to twice his age.
  11. Aw, come on, that would be to easy.
  12. So, your going to do an inlay of a different species of wood to go in that channel. Here's a suggestion. First do what Gary said, then take a piece of plywood, use a jigsaw or band saw and cut a pattern of the curve you want to make.. Get the edge of the pattern as smooth as possible. Clamp it to your bench on top of your cutting board, and be sure the board is clamped with it. Determine the center point of your bit to the outside edge of the router base, and move your pattern exactly that far away form the line you wish to route., and make sure when you start, that you are going in the right direction. You want to be going into the cut. Not the other way, that's called a "climb" cut and can cause you some of the problems your having. You want the edge of your router base to run along that pattern without changing positions, Take a lighter cut. And, make two or three passes til you reach the depth you need. One more point, make your pattern longer than your cutting board.
  13. These are going to sound like stupid questions, but truthfully they're not. This channel you want to route, is it going to be a juice grove around the edge of your cutting board? Is your bit clean? Is it still sharp. Are you moving at a proper speed? Are you trying to freehand this channel? Do you have or can you make a router table? Even 3/16ths may be to deep for you bit. Try to take less. If your going to your full depth your bit may be grabbing grain and throwing you off and making you slow down, that will cause burning. The answers, determine what may be going wrong.
  14. Would asking Lee Valley be out of the question? They're just a phone call, or email away.
  15. Bonny and Clyde, incognito, cool.
  16. Hey Mel. You look like you're going to the bank>
  17. Ross, I think Coop is now working the second Tuesday of each week. He's scared of retiring, His Bride has a to do list that runs from Houston to Oklahoma City.
  18. Now don't lose your head, you could run for hours.
  19. I forgot to mention, that the front of the knob has a dent rasped in it to give my forefinger a little extra grip.
  20. When ya get old, things happen that as a younger man you'd never expect to happen to you. Mainly because when we're young we know we're gonna live forever. I got old. I had a monster back surgery a year ago and it's made my ability to walk properly kinda crappy. And being on my feet for more than 10 or 20 minutes, causes more back pain than I like to brag about. Anyhow. I got a cane from my insurance company. It helps, but it's to short even fully extended. And all the canes in Walmart are short as well. So I made one. It to turned out to be to short, so it became firewood. I made another from an Apple branch and a chunk of Cherry scrap. That works okay, but I feel as though it to, is just a little to short. Last week I started with a piece of Sassafras that was way to long. Thinking I have a saw or ten, I could cut it to fi. So I proceeded on design. I wanted something a tad different. And after several days of cutting, shaping with a rasp and sandpaper, I wound up with one to tall. But as I mentioned, I have a saw somewhere in the shop. I made a cut. Tried it. Made another cut , tried it to. Another cut, and Damn! It's just right. Here's the three, with the last one being to me, quite cool and easy to handle. Three legs are better than two nowadays for me. I think you can see the improvement.
  21. What came in the mail today? The same thing that comes every day but Sunday. Another bill.