Chet

Moderators
  • Content Count

    6267
  • Joined

  • Last visited

  • Days Won

    55

Everything posted by Chet

  1. TripleH, its going to get tougher still to monkey with Stihl tools. The place my son in law runs is a Stihl certified repair shop and he was telling me that still has gone to all fuel injected & electronic ignition engines.
  2. My first round of tools were just sort of taken care of. Now over the last few years everything has been pretty much up graded and is now been taken crd and cleaned on a pretty regular basis. I think a lot of that comes with the fact that I am now retired and have more time to be in the shop. Some time I find my self out there with no project going on so I will start cleaning and tuning just cause I am out there. More available time definitely affects how the tools are stored and cleaned and general appearance of the shop. Retirement! I encourage everyone to try it at least once.
  3. We have a real Nanny State Government here in California. We are such stupid fools that we have to be told everything through laws... Pay extra for certain size sodas because they think I can't stop my self, what my kids can have in there happy meal if they expect to get a toy with it because I am not smart enough to feed them right ands as stated everything and I mean everything connected to woodworking is cancer causing EVEN my 5 micron Dust collection system and air filter came with those warnings, What?
  4. I also have the 1000HD, I have had it for almost a year. I haven't worked it to is fullest intent but it has been great with everything I have done with it so far. Cross cuts are great and after just a smidge of tune up the miters were right on. Since getting this, the only thing I have used my miter saw for is to break down lumber.
  5. Really nice work. Looks great!
  6. I was looking at The Woodworking Show's website last night and for some reason the show in Sacramento (closest one to me) has the fewest number of vendors, just over 30. All of there other shows have 10 to 15 more vendors and their show in Atlanta has twice as many. I guess we don't have enough woodworkers in Northern California to get more vendors. There were a number of seminars that looked interesting. I might consider going to the Southern California or Portland because they are offering more.
  7. If you win that you could end up in a high tax bracket... although I guess what you would pay in taxes is cheaper then the tools them selves. Might as well give it a try.
  8. I have yet to attend a woodworking show but I am thinking that it is something that would be worth while and fun. In searching on the internet, I have found four different shows. Three of the shows have a single location and one has several shows around the country over the course of the year. International Woodworking Fair in Atlanta which seems to be every other year. Association of Woodworking and Furnishing Suppliers in Las Vegas in July. Woodworking in America in Kansas City Mo. in September The Woodworking Shows which has several shows across the country. This would b
  9. Yea, what Steve said. Thats really nice looking.
  10. That is definitely a nice looking toy chest.
  11. Chet

    Jet Jointer

    I don't have the Grizzly Jointer that Eric spoke of but I have had my Grizzly jointer since 1992, my model is not in production any more but I would have to say the quality is there. I have only had to replace the power switch in that time and that was just a few years back.
  12. +1 on what TripleH said, I was just going to post the same thing on replacing the cord
  13. I just saw this the other day on the Grizzly website http://www.grizzly.com/products/Heavy-Duty-Mobile-Base/D2057A and http://www.grizzly.com/products/Extension-Kit-For-D2057A/D2259A
  14. Very nice, they will have good times with that
  15. I am going out to the shop. One advantage of living in California, the weather hardly ever becomes an excuse for not being able to go out to the shop. I feel for all you guys in the east and mid-west that are getting blasted with this cold weather. Although we could use some rain out here... fourth year of a drought, lawns dying everywhere. Anyway out to the shop.
  16. Chet

    Bandsaw Video

    As a retired but still young person (retired when I was 52) with a fair amount of time to spend in my wood shop now, I have spent a portion of the last year updating and remodeling my garage shop in between projects. I upgraded my table saw, finally put in a dust collection system and upgraded my planer for starters. Just this week I purchased a yet to be delivered bandsaw. After spending a serious amount of time researching and reading both here and elsewhere, I decided on the Laguna 1412. One of the things that really help was a video I found on their website. It is an hour and 16 minu
  17. A number of years ago I had asked for and received a lathe for Christmas. It is the Jet JWL 1236. As time went by I never really pursued using it much. I have probably put no more then ten sticks of wood on the thing the whole time I have had it basically just trying it out. Even though at the time I thought it would be enjoyable, I just never developed any desire for turning the way I have for the other forms wood working. I have finally decided that it is time to sell it and move on and I can use the space for my other tools. My question here is how much do some of you think I can
  18. Not trying to highjack to conversation but just as a side note to this discussion, I have a hand saw that was hand made by my Great Grandfather in the early 1800's. I actually have a claw hammer, some kind of plane and the saw all hand made by him. The way the story goes he was a carpenter and then a cabinet maker. Back then the first thing you did as an apprentice was make your tool box and then your tools. You can see some forge and other milling marks on the steel although everything is straight and true. I have always thought it would be nice to get the saw in working order but that i
  19. Thanks guys. I found the one Marc, Terry and Cochese mentioned at the local craft store today for about $8.00
  20. I am in the process of making a couple of end tables for our family room and my wife came out to check on me/the tables. while standing there she brought up something that I hadn't really thought of at this point but it is definitely a valid concern. She mentioned that the four grand kids and at times their parents struggle with the concept of coasters. Keeping track of all the cans, bottles and cups during family get togethers can be like trying to herd cats. She was wondering and now has me wondering if there is a finish that will stand up well to the lack coasters and the moister of cup
  21. I am getting ready to glue up some larger pieces and I have read were a number of you use an ink roller to spread the glue. Where did you purchase your ink roller and what is the clean up process? Thanks.
  22. I have never thought of doing this before but I started to wonder... is it a good idea or bad idea to use your planer or joiner to clean up glue after it has dried?