Chet
-
Content Count
6139 -
Joined
-
Last visited
-
Days Won
55
Content Type
Forums
Gallery
Calendar
Articles
Store
Everything posted by Chet
-
I would reinforce the torsion box top so that the corner you are going to mount the vise on is solid - and I would get bolts for fastening the vise that are long enough to go all the way through the top with nuts and washers.
-
My loudest tool is my DC which is on with every tool so ear muffs are always on in my shop.
-
I also have this sander and back up everything Drew mentioned above. The other thing that is a real plus with the Festool sanders is they are easy on the hand during long sanding sessions. I ran mine almost constantly for 4 hours today and could have gone longer if needed. I couldn't have done that with my old Dewalts I had in the past.
-
If I was feeling the OCD I would paint it white like the walls around it. But in reality I would probably spray a quick coat from a can of something in the shop that was almost empty anyway.
-
Derek, I am just now looking through this project and as mentioned above by Frank, I really like the different heights of the stretchers and what it does visually to the whole stool design. Well done once again.
-
Welcome to the forums George. Glad to have you join our group and looking forward to your contributions.
-
Might have been something that was repaired. Comes of the line and there is something wrong, they fix it but it can no longer be sold as new. I have the same model and really like it. I probably use it as much as my block plane.
-
Well this has been a heck of a journey to follow. I hope you get years of enjoyment out of your labors. I have a new appreciation of the term "Home Theater". I bet you are looking forward to some woodworking projects that aren't connected to the basement though.
-
The above jigsaw would probably do it Coop.
-
I was using it to vacuum up under the kitchen sink during this renovation and I could tell that it tasing filtering the air real well so looked at it and it was pretty dirty.
-
You will be real happy with that jigsaw. Its a beast, goes through 8/4 stock like most jigsaws go through 4/4.
-
I was going to say the same thing, I think it looks pretty good for pine and I bet when you get you top coat on you will be happy.
-
That's some real top notch work, lots of well done detail.
-
I just had to replace my Hepa filter on the CT, $75.00 for paper mounted in a flexible plastic frame.
-
instructions For Setting The Width On A Wobble Dado
Chet replied to freedhardwoods's topic in Off-Topic
I had one of the very first additions of the wobble dado and the registration marks for setting it were probably 1/8 inch off, no help at all. -
Yes it does. Thats the same hood Got with my 1400 and my CT has the original hose. The hose goes into the hood connector.
-
This is the way I would do it.
-
I think CSH is a better quality too. I by all mine from there.
-
I have that knob resting between the base of my thumb and index finger when I am using mine.
-
You're going to like it I have their large.
-
Is that one of the Veritas models Coop?
-
Probably not before the wedding.
-
I wouldn't know how to drink my morning coffee if I didn't have a paper, news paper. I need a page to turn to trigger my next sip.
-
I am working on a kitchen renovation right know and everyday has been like that.
