socoj2

Members
  • Content Count

    228
  • Joined

  • Last visited

Everything posted by socoj2

  1. Hmm now there is an idea i actually have some more 3/4 just seems like a waste using 3/4 as cabinets backs. but i dont want to wait!
  2. That face you make when you screw up an entire sheet of 1/2" prefinished plywood and you dont have any more. NOBODY sells prefinished plywood that is open on sunday!!! Damn it this is annoying.
  3. You want to borrow mine for a few weeks to try it out? i have it on a portable base.
  4. WHen i hook people up i go all the way =)
  5. This was the same haul i got my chisels and other stuff from. Vinny bought me two veritas Dovetail saws as a commission. I also picked up some stupid expensive marking gauge, an Air compressor, and some other miscellaneous items.
  6. Chisels have never touched wood. The shaptons may have sharpened a single item. I ended up hooking Vinny up with the guy as well and he dropped a fortune. so i ended up with 2 Dovetail saws as a referral fee. Vinny bought a power matic jointer, Drill press, a Oneida 5hp Dust collector. etc and a bunch of other crap.
  7. Pretty much if its a Structure thats permanent. Otherwise its just furniture. Unless your hoa has a furniture ordinance.
  8. They are going to have a lot of Torque on them from the pergola, my S.W.A.G engineering degree says i shouldnt.
  9. I picked up a whole set up DUO sharp and a 1k 5k and 8k Shapton stones, Stone holder, Flatner and a 10 set of Narex chisels for $200. OMG i should have gotten into water stones years ago. Spent the last 3 hours sharpening every kitchen knife to the point i had to caution the kids about touching one. These things are addictive.
  10. Thankfully Thomas Lumber is here local to me about 10 minutes away. looks like they have everything i need lumber estimate is about $1200 for this table.
  11. Of after i show the HOA its a table. im going to bolt it do the Deck =)
  12. My Hoa is run by the Little Colonel, and wont let me have a pergola over my deck. I need to build a table for my Big Green Eggs anyway. im looking at doing a 12'x32" table i was going to use 3x 8x8x8 and build a cantilevered pergola with 3 foot on the back side and 9 foot on the other side. What wood would you guys consider for this. First person that says teak Gets shot. The HOA doesnt have a restriction on furniture so as long as its not permanent no permission required. Pergola would be something like this but 3 uprights and a table build into it.
  13. Ill also take a partial Trade for Chisels and sharpening stuff.
  14. Straight blades on it, Cuts great, Parrallel beds are in good shape no rust. I forgot to take pics when at the office. will post them up tomorrow. $800 Just north of Atlanta.
  15. Way to frigging big for me but man i want it. 3 phase as well with the blade welder. $1350
  16. Not them either, i recently gota tapamatic with no college wrenches. these are cut really narrow and you can litterally ONLY use their wrenches... $50 =/
  17. 26"x23.5" ( number of holes (36))- qty 20 and 33.5"x 9" ( number of holes (52)) qty 20 and probably a run of 20 more down the road
  18. I need some sheets of 1/4 acryclic or maybe something else just as stiff (and cheaper) dimensions 26"x23.5" roughly and 33.5"x 9"
  19. like i got a bottle of some 18 year old , special oak macallan, i think it was like $120, it last 2 days... =D 2 days i dont remember very well, other than it was damn fun and tasty.
  20. im apparently an alcoholic, i drink to much to collect. Damn thats good (pours another etc)
  21. is the cable for teh TS75 difference size than other PlugIT cables? at least i have to use the cable that came specifically with the saw?
  22. I want to buy the large one. I mainly do large furniture.
  23. ill sell you my Domino 500 for $750+shipping. its probably done less than 150. its this setup http://www.toolnut.com/festool-574432-domino-joiner-df-500-q-set.html