• Content Count

  • Joined

  • Last visited

Everything posted by lui_b

  1. Looking at the serial number on my machine, it looks like at date. Possibly when it was completed in the factory. I received delivery in early march but the serial implies it is a year old(2018-12-16).
  2. I ordered the bandsaw through my local woodcraft and it did not come with a blade. I purchased 3/4 inch Starret and 1/4 Timerwolf. I have so far only used the 3/4 inch blade. Wow! Yours does have a third pulley.
  3. One more thing for a new owner is the blade tension adjustment is not capped at the end. if you turn the wheel too far the bolt keeping the tension spring in place will fall off. It will result loosing about 4 hours trying to get the top wheel off to re-assembly the tension spring. I could not get it off easily. Jet support suggested to hit the shaft with a dead blow hammer to loosen it. This worked for me.
  4. I purchased the Jet 14SFX last month and I have had the same initial findings. I too setup the bandsaw saw and used the snodgrass method to tune. The overall quality was poor from the factory. Lowering or increasing the blade height adjustment is sloppy and has enough play to where I have to make an adjustments to all upper bearing guides. The lower wheel and motor pulley were misaligned. This led to the quick deterioration on the v-belt which came off the pulleys after about a week and half use. Dealing with Jet support was extremely fr