• Content Count

  • Joined

  • Last visited

Community Reputation

0 Neutral

About tauchen67

  • Rank
    Apprentice Poster

Profile Information

  • Woodworking Interests
  1. I was thinking of making jewelry box rather than a humidor and I was thinking of using mdf rather than solid wood for the box sides and veneer in both the inside and outside. My question is what I would you guys do to cover up the exposed edge when I split the box open? I have thought I could make iron on veneer for the edge but that is going to chip easily. Would you just glue on a narrow piece of hardwood?
  2. I live in OC, CA as well and as I do not know of any tool brokers like you are talking about except maybe someone that does estate sales, but I don't think that would work. I might be able to help take some of those tools off your hands if you are willing to sell some of them individually.
  3. its new to me, im curious about it. It obviously no festool but i wonder if it is better than harbor freight?
  4. I am also in the LA area and have been looking for classes and it seems like Cerritos or the William Ng school are the options aside from when Woodcraft or the Rockler stores do demos.
  5. ok so I know this is the classic question of what should I buy, but I am going to try and give my thoughts and maybe you guys can help me to make sure I am going in the right direction. I think a bandsaw is the next tool I am going to get for my shop. I am thinking 14", I think with a 6" riser on it because I want to be able to resaw larger rough stock. I am debating on if i should buy a new such as the grizzley g0555lx (if there are other brands recommended in this price range please let me know). part of me thinks that buys a used BS would save me cash and perform just as well for me, but
  6. thanks for all the responses everyone, I feel a lot more confident going forward. not sure what im going to use for the frames and doors now, i thought i was more limited on options. ill post pics when it eventually gets done. Jhop, im assuming you mean to make the concrete counter top seperate and then place it on the cabinets rather than pour it in place on the cabinets. I was planning to create it in a seperate mold and then place it on the cabinets, going to put some sort of metal in it as well (thin gauge rebar, wire screen, etc) for reinforcement.
  7. Hey Everyone, I know I don't post much, but I wanted to see what you guys thought about a project I want to attempt. I have a covered patio that we use quite a bit in the summer time and I wanted to build a 10' bank of lower cabinets for storage and counter space for food etc. I was thinking of making the face frames and doors out of cedar since teak is very expensive. My question is what to make to carcass out of? This area does not get very wet, but it is outside and I do hose down the patio before a party. I was thinking that cabinet grade ply and using the adjustable feet rather
  8. so i went and put some calipers on the veneer. I got .018 in or .48mm. I also talked to my Uncle and he said it is usually 1/42 to 1/50th of an inch when they order it. For the panel i do not do not have a bag. I have had descent results with mdf panels and lots and lots of clamps. i know a bag is best, but i have just been doing flat pieces and have been saving to get a pump and bag.
  9. That's a good idea. I like the idea of cutting on the TB because I can use the router bit to set the exact width. No access to a drum sander.
  10. So was given some scrap veneer from my uncle who has a production veneer shop. I have been playing with marquetry type stuff (chess board). This is the really thin veneer i think 1/64" i think he said. What i want to do is use some of this stuff on some frame and panel doors i am making. I am just going to do a book match on the 1/4" panel, but on the frame i want to do a 1/2" inlays strip all around the face of the frame. How do i cut a groove just shallow enough to get this veneer into? i have though of just taking my plunge router with a 1/2" straight bit, zero it out, then usi
  11. I live in southern California and have a neighbor who has a jacuzzi that is still in good shape, but the surround is deteriorating. They asked me if i could build some new panels for the skirt. All it is is 4 panels (one per side) that are screwed to a sub frame. I was thinking of doing something out of redwood, and making a frame with tongue and groove or ship lap vertical inserts. I started to wonder about the wood movement of redwood when it is outside. I was thinking i could do a custom ship lap and make extra deep rabbits that would allow for more movement. Any thoughts, other idea
  12. So I'm making cabinets for my shop and I want to make basic frame and panel doors. Done it tons of times with my router table. Problem is now most of my woodworking is done after 8pm (11 month old twins bed time). I wasn't planing on making a haunched tenon just a 1/4" wide by 1/2" deep tounge into the groove like what I would do with my router table. I know a stanley 48 (I think) will do tounges and grooves, but what about a tounge on the end grain? Should I just plow out the groove and cut the tounge by hand?
  13. Hi everyone, I have rescently started wanting to work more with hand tools, having been inspired by a lot of the hybrid woodworkers out there. My problem was that I have 10 month old twins which means I have no money. I was looking at getting some planes of ebay and trying to refurbish them, but was always affraid of buying somthing beyond repair and having a doorstop. To get to the point my parents have sold my grandmothers house and were cleaning out the garage. My grandfather was one of those guys who could not pass up a deal, even if he had 10 screwdrivers he would buy 10 more if t
  14. the ruler teaches ratio/scale and perspective. I dont know how many times I have sketched up a drawing to scale that looks good on paper, but once I start putting a tape on it i quickly realize that a distance may be to large or to small for a piece of lumber. That same drawing might look good on paper, but might not look so good scaled up to full size. Josh been working on my house for 3yrs now
  15. Hi everyone. I have been focusing on learning woodworking with making cabinetry (mostly because I am a new homeowner and I need storage). The boxes are the easy part, it is playing around with the doors. Against some advice I have read on other posts and podcasts I have been practicing with pine. Thanks you Marc's raising arizona video i have gotten pretty good at raised panel doors. I was thinking my next project would be to make new doors for our kitchen cabinets. I was thinking of trying to do something like what Marc did on his fancy raised panel video, but with a thinner veneer. Is