• Content Count

  • Joined

  • Last visited

Everything posted by wintersedge

  1. If you have other Festool, have limited distance to the wall, need a light saw or if you move your miter saw around a lot a Kapex is well worth it. If it is going to be stationary I would not have bought a Kapex. I have been very happy with the Makita LS1221. I have also been very happy with the Bosch 5312. The price ranges are all over the map. I have not had any issues with any of the miter saw listed above so my opinion might be heavily biased. I do know if one were to have an issue I would want it to be the Festool.
  2. There is a lot of 'fun' you can have with this. You can easily put in some logic to do a geo query of where the linking site is coming from and serve up different content.
  3. Was the majority of the show space just a market area for Peachtree Woodworking? The show is Atlanta is always hit and miss. Last year it was nice having Paul Sellers there. There were a few good used tool vendors. The local woodworking clubs were well represented.
  4. Anyone use Old Brown Glue? If so, what is the shelf life on it once opened? Just how badly and how far does the smell of authentic hide glue permeate?
  5. Any chance we could get a deals sub-forum? This thread is going to get gangly after a few weeks.
  6. This sounds more like a boundaries issue.. and not boundaries in the sense of one party or the other crossing lines but communication on where boundaries should/could/would be. ie.. You openly and honestly discuss what are her expectations of time and what are yours and then come up with a win/win solution. You stated that company comes over every day and you feel obligated to entertain.. why/who is coming over every day? Discuss if your wife can entertain them without you, would it be better if people came over less or not at all for x time period, offer to entertain for X time but you need time to dedicate to your project/business... Somewhere in there is a line that needs to be established, communicated, agreed upon, and respected. There is so much more I could toss out.. but may get a little too personal. Feel free to PM if you want to discuss more offline.. I highly recommend the book Boundaries by Henry Cloud.. every couple should read it together and discuss together.
  7. If you are not familiar with you should check it out. It gives you historical prices on Amazon and some third party sites. You can setup triggers to notify you when an item reaches a target price.
  8. Thanks for the information. A good bit of knowledge in there as well.
  9. I too would love to get back to this way of life; though I would truly love to get back to the days when local was both maker and seller and not just a distributor. It took me a while to break out of the gotta have it now mold. It brings a smile to my face knowing a boutique maker has to source materials, craft my item, and it could be 2 weeks to 6 months before I get it.
  10. When you get ready to order consider a 2-3 day lead time if you are ordering from 80/20 directly. Most of the resellers(the ones in GA) do not stock material. You may also want to consider Bosch Rexroth aluminum framing. It is a more costly than 80/20. They have a much larger distribution network and larger product selection. Bosch can also be bought on Ebay. One other product to check out is Faztek: I have not used their product but others around me speak highly of them. They are based in Fort Wayne, IN about 30 minutes from 80/20. Cheers
  11. I am curious about purchasing an infill plane. Is it possible to buy a smoothing infill for under $250 that will not require a complete rebuild? Do infills cut different/better or is that mostly hype. I notice most all the boutique plane makers build infill type planes, why is that? I welcome any advice you can give.
  12. With you on this Freddie. My wife comes down to the shop and we have started making cabinets and book cases together. She has said she wants to help with the Roubo. The only problem I have run into is that I do not share well so she went and bought her own CXS and is threatening to buy her own router and sander... and yes, put a ring on it quick.. those willing to share your hobby is a keeper!
  13. I went the same route and ended up going O1. I use a strop and have not noticed that I need to sharpen any faster than the A2 chisel. These are my bench chisels only. I wish they made mortising chisels in O1. On the flip side I honestly do not see that O1 takes a keener edge. I use a diamond stone and they both sharpen in the same number of strokes and both metals peel a whisper thin shaving if needed.
  14. What really grinds my gears... A friend borrowing my car who does not know how to drive manual transmission... That really grinds my gears..
  15. A good mechanical pencil fold out ruler a quality paint brush having music in the shop.
  16. I have been applying for jobs in Gent Belgium to open up the opportunity to take a 12 week intensive course. The Center for Furniture Craftsmanship is at the top of my list. I would then go back to work for two years and apply at College of the Redwoods or North Bennett. If that failed then I would apply at CFC. Trying to find the hours to dedicate a sold 90-120 minutes a day in the shop is getting tougher and tougher. If I am going to jump ship I might as well shoot for the moon and pick a job with 8 weeks vacation to start. During this time I am going full speed absorbing, playing, breaking and fixing as much as time allows. The crazy part is that I do not want to build fine furniture. I want to build exquisite built-ins, with wifi, color and temperature changes from a smart device in a personal space that is well laid out using cutting edge insulation. Geothermal heating/cooling, that gives a very comfortable life. I am likely rambling now....
  17. Norm Abrams... or is that considered heresy? I have watched a few of his shows and they just never stuck. I am not a big fan of the Wood Wright shop either; but Roy is darn entertaining live.
  18. If you wanted an education similar to North Bennett Street or College of the Redwoods but had to gain it via independent study and/or school of hard knocks what tools and resources would you use to get there? This started a little vague.. What books would you study? Which online instructions would you subscribe to? TWW is a given Which DVDs are invaluable? What short term classes would you attend? What long term(2weeks and greater) classes would you attend? What projects would teach you techniques and push you to greater heights of learning and skill? Cheers
  19. If you get around to using the saw I would be curious how much of a workout you get. I have ripped a few pieces of 2x12 and by the third board I was completed winded...
  20. I think this is what Mike Rowe meant by safety third. I am sure Izzy is not doing anything unsafe from his perspective. I do not have the dexterity to boost my confidence that I could pull this off consistently without an accident.
  21. Not yet. I blew out my savings and enjoyed some holiday giving.
  22. There is peace and solace in doing something repetitive that can be done on autopilot. I find my zen in sharpening and there are times I will sharpen and then polish to a mirror shine for now other reason than it is pleasing to the soul. I have been known to spend many minutes just wasting wood and taking whisper shavings...only to then have to resharpen.
  23. I am with Steve. I have never met a woodworker who complained about his machine being too big or too powerful unless they are moving to a smaller shop and/or doing all the lifting themselves.
  24. Here is the product to line up your guide rails. I personally don't think it is needed, but some may have a reason for it:
  25. Good idea. I stuck mine on wheels. It seemed like a good idea at first but has become a hassle when taking items out of the lower sustainer. I am now thinking about changing the Roubo bench into a Frankenstein Roubo/MFT 8' contraption with sliding drawers underneath.