ProfessorChaos

Are 3/4" Pipes Overkill?

Recommended Posts

So I'm about to expand my clamp collection, and I will be purchasing a few sets of Bessey pipe clamps.  My current pipe clamps are 3/4", and the 4' ones are a little cumbersome, so I'm wondering if 3/4" black pipe is overkill, and if anyone has experienced any problems with 1/2" black pipe.

Obviously I would love to buy nicer clamps, but I'm a hobbyist on a really tight budget (is there anything worse?)

Thanks.  I'm so glad I found this site, you guys are the best!

Share this post


Link to post
Share on other sites

      I've got a couple 4' 1/2" pipe clamps, and for strength, they're not worth the effort, the pipes over that length, bow and cause a cup.... 3/4" is the best way for wide pieces!

Share this post


Link to post
Share on other sites

Smart move. I have a couple of old Bessey 1/2" pipe clamps that my dad gave me because he had laying around and they are not near as strong as the 3/4".

Share this post


Link to post
Share on other sites

I have a bunch of pipe clamps since before the parallel ones became popular.  All the 3/4 ones are still good, and all the 1/2" ones are bent.  I've even used connectors to make 60' long pipe clamps with 20 foot sections of 3/4 black pipe working on houses.  The 20 foot pipes have been hanging at the top of a wall in one of the shops for decades, and stlll are called on once in a while.

Share this post


Link to post
Share on other sites
Guest

I have caused my 3/4" pipes to flex so I think 1/2" would be too weak.  That being said, pipe comes in different wall thickness.  schedule 40 is standard, schedule 80 is thicker.  1/2" schedule 80 pipe is about the same wall thickness as 3/4" schedule 40.    

Also, I have galvanized and black pipe clamps.  PVA glue can react with the coating on black pipe and get all over you work.  I don't if galvanized is more expensive.  My dad made my galvanized pipe clamps back in the 1980s. 

Share this post


Link to post
Share on other sites
Guest
Just now, Bobby Slack said:

For that style of clamps, I prefer the "I" clamps from Jorgensen and are super heavy duty

I have some, they are nice.  Heavy, expensive, but nice. 

Share this post


Link to post
Share on other sites

I already hijacked one thread to turn it into a jorgensen parallel clamp appreciation thread, so I will retrain myself from doing that again here...

  • Like 1

Share this post


Link to post
Share on other sites

Something to be aware of with galvanized. If the zinc coating is very thick, it will creep because it is quite soft. I ended up tossing all my  3/4" galvanized pipe & going to black because of trouble with the clamp fitting not gripping well. They are Jorgenson clamps. Others may vary

Share this post


Link to post
Share on other sites

I learned the black pipe stain lesson the hard way.  I think it was my very first red oak panel.  I use pipe insulation or wax paper between the project and pipes now.

I do like those Jorgensen clamps, a lot of size options too.  HD has a good deal on 50" Bessey K-Body, $40 I think, so I'll probably pull the trigger on those when I start to cross items off my wish list. 

Share this post


Link to post
Share on other sites
On 2/5/2016 at 4:05 PM, Mike. said:

I have caused my 3/4" pipes to flex so I think 1/2" would be too weak.  That being said, pipe comes in different wall thickness.  schedule 40 is standard, schedule 80 is thicker.  1/2" schedule 80 pipe is about the same wall thickness as 3/4" schedule 40.    

Also, I have galvanized and black pipe clamps.  PVA glue can react with the coating on black pipe and get all over you work.  I don't if galvanized is more expensive.  My dad made my galvanized pipe clamps back in the 1980s. 

Stiffness of pipe is a largely a function of diameter.  So matching wall thickness on 1/2 pipe won't help much as far as making it as stiff as 3/4"

Kind of wish they made 1" pipe clamps.

Share this post


Link to post
Share on other sites
2 hours ago, Hurricane Dry said:

Stiffness of pipe is a largely a function of diameter.  So matching wall thickness on 1/2 pipe won't help much as far as making it as stiff as 3/4"

Kind of wish they made 1" pipe clamps.

Ya, even the 3/4 flex too much for my liking & heavier wall thickness would just make them, well, too heavy.

Share this post


Link to post
Share on other sites

One of the contractors I worked with years ago had both 1/2" and 3/4" pipe clamps. I never really liked the 1/2" clamps that were set up on 5' lengths (10' pipe cut in half.) But I thought they were fine for short clamps like 3' or so and under. 

For anything longer I always preferred the 3/4" pipe. 

Pipe clamps are a great way to create a flexible clamping system. I can take the heads off my 5' pipe sections, join them with other sections and create longer clamps when needed. Not to mention that I have a few 10' sticks of 3/4" pipe and I will place the clamps heads on them when doing larger glue-ups. 

Before I ever heard anything negative about using galvanized pipe I had already purchased it. Fortunately I have not had any of the problems with it at this point and I have been using them for many years. 

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.