spuriousdata Posted October 31, 2016 Report Share Posted October 31, 2016 I have a 6" Grizzly GO452Z that I'd like to part with. I'm moving more toward hand-tools and I'd like to free up the space in my shop. It's 110v, but I think (not positive) it can be wired for 220v. The jointer works great, but it could probably use a new belt. I ran a really soft piece of 2x4 douglas fir through it against the grain and there was almost no tear out at all. The cutters are all still good and have never been turned, so there's 3 fresh sides left plus the life on the current edge. There is a small spot of surface rust on the far edge of the outfeed table and some light surface rust on the cutter head (but not the carbide cutters). I can't ship it for obvious reasons, but if you're relatively close to Bridgewater, I can probably bring it to you. $300 Here are some pics including the 2x4 I just ran through it. Please excuse the mess in my shop Small rust spot on the outfeed table, should come off easily: Light surface rust on the cutterhead: Just ran this through: Link to comment Share on other sites More sharing options...
wdwerker Posted October 31, 2016 Report Share Posted October 31, 2016 Almost 1/3 the original price, whadda ya want for cheap from Jersey ? Link to comment Share on other sites More sharing options...
xxdabroxx Posted October 31, 2016 Report Share Posted October 31, 2016 Too bad you aren't on this side of the country, I'd snag that up in a heartbeat. Link to comment Share on other sites More sharing options...
Cochese Posted October 31, 2016 Report Share Posted October 31, 2016 If I had a truck I'd be on my way. Link to comment Share on other sites More sharing options...
spuriousdata Posted October 31, 2016 Author Report Share Posted October 31, 2016 Yeah, sorry Cochese, I can't bring it to atlanta. Link to comment Share on other sites More sharing options...
RichardA Posted November 1, 2016 Report Share Posted November 1, 2016 Oh well, I just bought one...........Damn! Link to comment Share on other sites More sharing options...
wtnhighlander Posted November 1, 2016 Report Share Posted November 1, 2016 I have a truck, but gas for the drive would offset the price difference. Bummer. Link to comment Share on other sites More sharing options...
wdwerker Posted November 1, 2016 Report Share Posted November 1, 2016 A fire started near the break in the petroleum pipeline in Alabama and they have shut off the flow of gasoline. This might be another gas shortage/excuse to raise prices ! The pipe comes thru Atlanta and then it heads up the east coast to NY. Link to comment Share on other sites More sharing options...
Recommended Posts