Sign in to follow this  
logos

Work bench mishap!

Recommended Posts

 

I'm nearing the end of this project and was just marveling at how few mishaps I've had!

 

 

I was routing the dog holes when the router jerked. Not sure why but certainly could have been me.

 

 

I added a big champher to the hole but still stands out and isn't smooth

 

 

Anyway, looking for opinions...

 

 

It's a work bench that's going to get beat up eventually, so I could just leave it bebc00d6b72e3f41509c1e80905f57ee6f.jpga2c4c99afec89e48cffb5cd82a8c8d8c.jpg7b17973592c734078c224988d6cf668a.jpg05f2325abe71f6aa2cd0fee75d4f1c9b.jpg5265aef15918bea41edd1add3f351880.jpg

 

 

I could try and drill it out and plug it with an 1.5 plug.

 

 

I could add more of a champher and make a unique dog for it

 

 

Other ideas?

 

Share this post


Link to post
Share on other sites

Great looking bench!  You could fill with epoxy and redrill.  I'd use solid wood for the center and then top it all off with epoxy.

  • Like 2

Share this post


Link to post
Share on other sites

Since it has a rather unique look and shape could you possibly make a one of a kind planing stop? Something of a half moon shape with teeth along the leading edge.

 

Sent from my SM-G950U using Tapatalk

 

 

  • Like 1

Share this post


Link to post
Share on other sites
Since it has a rather unique look and shape could you possibly make a one of a kind planing stop? Something of a half moon shape with teeth along the leading edge.

 

Sent from my SM-G950U using Tapatalk

 

 

Was thinking about putting a planning stop somewhere...

 

Great suggestion!

  • Like 1

Share this post


Link to post
Share on other sites
16 minutes ago, Eric. said:

Some idiot pushed a straight bit into my front laminate one time

Did you tear him a new one? :D

  • Like 1

Share this post


Link to post
Share on other sites
20 minutes ago, Chet said:

Did you tear him a new one? :D

There was a hippie in my shop that weekend building canoe paddles with me.  I took it out on him.

But to be clear, I was the idiot who did that.

  • Like 1

Share this post


Link to post
Share on other sites
5 minutes ago, Eric. said:

But to be clear, I was the idiot who did that.

Yea I was guessing that.  When I do stuff like that I always blame the idiot.

  • Like 1

Share this post


Link to post
Share on other sites
4 minutes ago, Chet said:

Yea I was guessing that.  When I do stuff like that I always blame the idiot.

He won't leave me alone.

  • Like 1

Share this post


Link to post
Share on other sites
I'd route out and chisel a rectangular section as deep as the tearout goes then inlay another piece of wood.  Then re-drill.  Some idiot pushed a straight bit into my front laminate one time and I had to do a similar repair.

 

 

15eb48f8d43ac3b54d9762e53933477a.jpg

 

I just found a piece to inlay from the same stock.

 

Thanks!

 

 

 

 

Share this post


Link to post
Share on other sites

Eric is right on. I had to do it when my test cut with my Domino went through the test piece. A good reason to save a few of the cut off pieces from the build. 

Share this post


Link to post
Share on other sites
11 hours ago, logos said:

Great idea! Put in a 3/4 inch dowel with epoxy filling in the champher and re drill if I'm understanding. That could work!

The epoxy won't take the sideways pressure very well that a dog hole experiences.  I'm in the camp that favors mortising it out square and gluing in a piece of like material.  Then re-drill/route.  This info is too late but, when using a plunge router for dog holes, I add an oversized baseplate of scrap ply and clamp the router to the bench to assure it stays put during the operation.  Here, I'm adding a dog hole to a vise chop in place.

595b0a4a132c5_TNNWEndVise(32).jpg.1892a47a0254327e4f4f912af66ca9ea.jpg

Share this post


Link to post
Share on other sites

I'm kind of curious how you were getting through 4" of material with a router bit anyway?  I would have gone drill bit and jig for that job.  Plunging that big of a hole in that much material with a router is in the pucker & poop chapter of my book.  I actually did mine on the drill press. LOL

Share this post


Link to post
Share on other sites

Yeah, it was a bit stressful. A buddy lent me his festool 1400 router with a spiral 3/4 inch bit.

 

He also lent me a track but my bench was to long to clamp easily. I'd never used the system before so maybe I just didn't know how to adapt it.

 

I wound up using the edge guide and puckering a bit. Cut like butter through the hard maple.

 

The bit cut about 3 inches deep. I'm going to use a drill to finish it since the hole will act as a guide

 

I'm going to plug it with a 3/4 inch dowel and inlay the top year out with my white side inlay kit I'm going to inlay a circle to make it a no brainer plug. The squaring would take a bit more work and I'm not sure I see the advantage other the style?

 

Thanks for all the help!

  • Like 2

Share this post


Link to post
Share on other sites
4 hours ago, logos said:

The bit cut about 3 inches deep. I'm going to use a drill to finish it since the hole will act as a guide

For future reference, you could have made a simple jig by drilling a 2" hole in some random blocky scrap of wood at the drill press, and using that to guide the beginning of your entry when drilling the holes in your bench.  If you clamp the jig hard to the bench it will also help prevent entry tearout because the fibers will be supported by the bottom of the jig.  Your holes will be perfectly straight as long as you use the DP to create the jig.

Not that you'll need to drill dog holes again anytime soon...but the next time you're faced with plunging huge holes that deep...reconsider.  That's a disaster waiting to happen.

  • Like 2

Share this post


Link to post
Share on other sites
Guest Randy

I would agree with Eric that a good option would be to rout out a rectangular section around the hole, match the wood as close as possible, glue the piece in and re-drill.

Normally plugging with a round plug would be the easiest, but I don't know where you would get a plug cutter that diameter. I've never seen them larger than 5/8" in diameter.

One other option is to route out a rectangle or some other shape on both of the holes near the vise, glue in contrasting plugs, re-drill, and then it would look like a unique design feature.

Or you could leave it but  I know that's hard to do on a bench that looks that great. For me, leaving mistakes in the shop can be a good reminder for what I shouldn't do in the future.

Share this post


Link to post
Share on other sites

You know, with a bench-top drill press, it is possible to clamp the 'foot' to the underside of the bench top (along with a scrap to control tearout), and drill the hole right through the bench.

  • Like 1

Share this post


Link to post
Share on other sites

 

Thanks! I'm happy with how it turned out. Will suit my work flow. The repair just adds a design feature which I'm sure will be followed by numerous other dings.

 

 

Appreciate the help along the way!

 

Share this post


Link to post
Share on other sites
1 minute ago, logos said:

 

 

Thanks! I'm happy with how it turned out. Will suit my work flow. The repair just adds a design feature which I'm sure will be followed by numerous other dings.

 

 

 

 

Appreciate the help along the way!

 

And well you should be happy! That's one fine bench. How long is it?

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this