paul shelgren

Sanding epoxy coat on live edge

Recommended Posts

Sure can, progress from mid grit depending on how bad it is(I usually start 150 range). Continue a bit higher than you would for raw wood. I go up to 500 sanding pad over epoxy. Leaves a nice scratch free result under finish. That isn't high enough for high gloss though.

Share this post


Link to post
Share on other sites

I often use the ros with 80 for initial leveling after filling knots with epoxy. Then progresses up the closer you get to final finish.

  • Like 1

Share this post


Link to post
Share on other sites

What is the finish? What was under the finish? The only time I've gotten hazy spots was applying finish when there was too much moisture in the wood from raising the grain, and overworking poly. 

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now