bushwacked Posted November 20, 2017 Report Share Posted November 20, 2017 My black plastic connection piece that goes onto the tool is broke and falls off. I was hoping to get a new black piece .... buuuut the one on there now is the bigger model 35mm and I was hoping to get the 27mm connector piece. Will that work? Or is the hose too big for that and I’ll just have to buy a 27mm hose? Quote Link to comment Share on other sites More sharing options...
Chestnut Posted November 20, 2017 Report Share Posted November 20, 2017 I might have a spare connector for a festool hose. Actually i might have a couple. Is this what your talking about? Quote Link to comment Share on other sites More sharing options...
minorhero Posted November 20, 2017 Report Share Posted November 20, 2017 Not sure where the break is and if you just want to repair it as an option. But this stuff is fantastic. I have had multiple plastic parts that regular super glue and epoxy doesn't stick to, but this stuff works. https://www.amazon.com/dp/B000Y3LHXW/ref=asc_df_B000Y3LHXW5274575/?tag=hyprod-20&creative=394997&creativeASIN=B000Y3LHXW&linkCode=df0&hvadid=198093606370&hvpos=1o7&hvnetw=g&hvrand=18422769581916713758&hvpone=&hvptwo=&hvqmt=&hvdev=m&hvdvcmdl=&hvlocint=&hvlocphy=9007713&hvtargid=pla-320192516791 Quote Link to comment Share on other sites More sharing options...
wdwerker Posted November 20, 2017 Report Share Posted November 20, 2017 I am pretty sure the 35 mm goes over the tailpiece and the 27 goes inside. Quote Link to comment Share on other sites More sharing options...
bushwacked Posted November 20, 2017 Author Report Share Posted November 20, 2017 10 hours ago, Chestnut said: I might have a spare connector for a festool hose. Actually i might have a couple. Is this what your talking about? Looks like it? Is that the piece that connects to the tools dust port? 9 hours ago, minorhero said: Not sure where the break is and if you just want to repair it as an option. But this stuff is fantastic. I have had multiple plastic parts that regular super glue and epoxy doesn't stick to, but this stuff works. https://www.amazon.com/dp/B000Y3LHXW/ref=asc_df_B000Y3LHXW5274575/?tag=hyprod-20&creative=394997&creativeASIN=B000Y3LHXW&linkCode=df0&hvadid=198093606370&hvpos=1o7&hvnetw=g&hvrand=18422769581916713758&hvpone=&hvptwo=&hvqmt=&hvdev=m&hvdvcmdl=&hvlocint=&hvlocphy=9007713&hvtargid=pla-320192516791 It split right down the rubber on the front of the black piece so it doesn’t stay on as tight and wiggle loose. I will look into that. 8 hours ago, wdwerker said: I am pretty sure the 35 mm goes over the tailpiece and the 27 goes inside. Hmmm that is good news then. Would much prefer a little cheap part to a $160 hose lol Quote Link to comment Share on other sites More sharing options...
Chestnut Posted November 21, 2017 Report Share Posted November 21, 2017 39 minutes ago, bushwacked said: Looks like it? Is that the piece that connects to the tools dust port? Yeah it's the part that goes on the end of the hose that connects to the tool. Quote Link to comment Share on other sites More sharing options...
rodger. Posted November 21, 2017 Report Share Posted November 21, 2017 If it's Festool they may replace it free of charge. Give em a call - worth a shot. 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.