Sign in to follow this  
TheFatBaron

New plywood over an uneven work surface

Recommended Posts

Hi everyone - 

After relocating to the PNW last summer, I'm finally getting around to a fun to-do item: resurfacing the workbench in the shop area of the house we bought. It's simple plywood and 2x4 cabinetry - incredibly stable, and the right size along the length of the way - but the surface itself is nowhere close to flat. The seams between the old plywood are up to 1/8" out of flat. The easiest thing for me to do would be to drop a 3/4" sheet of ply over top, screw it down and call it a day, but then I worry about the ply flexing under load as I do hand planing or something. Otherwise, I could shim the worst of it before screwing it down, or go thicker with an actual wood top. Thoughts? Alternatives? Am I missing an obvious way to level the current surface before putting down the new surface?

IMG_4637.JPG

Share this post


Link to post
Share on other sites

My first thought is to make sure that the existing surface is solid with no flex or give anywhere. then use some leveling compound like that sold for use on flooring. Most of the leveling compounds I have used set up fairly quickly. So, you may want to set some screed strips at 3-4 locations and then do one section at a time. Of course, all the screed strips should be parallel with each other and at the same relative height so your plywood or mdf top will be level. Rather than plywood, I would be inclined to use mdf with a hardwood edge and then put a replaceable 1/4" hardboard top on that.

That's a nice looking planer sled. Does it work well or have you used it yet?

Share this post


Link to post
Share on other sites

The existing surface is very solid. If it flexes or gives, I can't tell. Your idea for leveling compound is great, and I'll look into it.

Yeah, the planer sled works great. If I did it again, I wouldn't use melamine shelving for the main body. Even with sandpaper on the bottom of the risers and wedges, it's still a little slippery. But the basic construction is stiff over its' length, and easy to grab and move.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

  • Who's Online   2 Members, 0 Anonymous, 1 Guest (See full list)

  • Forum Statistics

    28027
    Total Topics
    375933
    Total Posts
  • Member Statistics

    21242
    Total Members
    1529
    Most Online
    murphyce
    Newest Member
    murphyce
    Joined