Midlife Posted March 1, 2018 Report Share Posted March 1, 2018 Anybody use a blade like this ? https://www.woodtalkonline.com/topic/27871-new-toys/?do=findComment&comment=358086 Thanks Smifffy Quote Link to comment Share on other sites More sharing options...
wdwerker Posted March 1, 2018 Report Share Posted March 1, 2018 I haven't seen a long carbide tooth situated quite like that before. Maybe it's intended to leave a very smooth cut ? I've never seen a center that way either. I would like to see the arbor on the saw. Quote Link to comment Share on other sites More sharing options...
Tpt life Posted March 1, 2018 Report Share Posted March 1, 2018 Many blades have deep slots. That “tooth” does not appear as wide as the primary teeth. Can you verify whether this is true or not? It could be more about wear resistance and heat dissipation, and less about cutting. Quote Link to comment Share on other sites More sharing options...
Midlife Posted March 1, 2018 Author Report Share Posted March 1, 2018 Going to get my calipers from the workshop ,back in a bit . Quote Link to comment Share on other sites More sharing options...
Midlife Posted March 1, 2018 Author Report Share Posted March 1, 2018 The long tooth thing is 2.2mm & the proper teeth are 3.2mm . Going to get pictures of the arbor now, The extra holes are for safety, the blades stop real quick on a Hammer t/s. The arbor info starts at 8.00 minutes Quote Link to comment Share on other sites More sharing options...
Midlife Posted March 1, 2018 Author Report Share Posted March 1, 2018 http://uk.feldershop.com/en/Sawing/Saw-blades/Professional-rip-saw-blade-Flat-teeth-315-mm-T-20-2.html Quote Link to comment Share on other sites More sharing options...
collinb Posted March 1, 2018 Report Share Posted March 1, 2018 Interesting. "The side raking cutters support ease-off, in particular for wet and highly resinous solid woods.. " Sort of makes your table saw a little sawmill. Quote Link to comment Share on other sites More sharing options...
jplemons Posted March 2, 2018 Report Share Posted March 2, 2018 If it doesn’t have 200 teeth, I ain’t using it. 1 Quote Link to comment Share on other sites More sharing options...
Popular Post RichardA Posted March 2, 2018 Popular Post Report Share Posted March 2, 2018 Remember this is a European saw blade.... Not everything on the planet conforms to we here in the US. 4 1 Quote Link to comment Share on other sites More sharing options...
wdwerker Posted March 2, 2018 Report Share Posted March 2, 2018 It's also a blade that's for a much more sophisticated saw than most of us have. 1 Quote Link to comment Share on other sites More sharing options...
Catco Posted March 3, 2018 Report Share Posted March 3, 2018 That dado stack has replaceable insert knives. I want. Quote Link to comment Share on other sites More sharing options...
wdwerker Posted March 3, 2018 Report Share Posted March 3, 2018 $$$ Quote Link to comment Share on other sites More sharing options...
Midlife Posted March 3, 2018 Author Report Share Posted March 3, 2018 The rip blade cuts nice and clean as you would expect from a new blade. The wood (Alder) arrived around 09:00 this morning, so I've been working on the ripping the slabs down to ruff size for 11 windows, 4 external doors, 7 internal doors, 1 sliding door & one hidden door in a library shelving wall, so when that lot is done I'll start to make the 5 roof windows. I'll put some pictures here in an hour or so. Smifffy Quote Link to comment Share on other sites More sharing options...
wdwerker Posted March 3, 2018 Report Share Posted March 3, 2018 European black alder or American Red alder ? I just looked alder up , didn't know there was a European type. I'm always learning something new. The red alder is easy to use but just soft enough that you have to be careful not to dent the freshly milled faces. Quote Link to comment Share on other sites More sharing options...
Midlife Posted March 3, 2018 Author Report Share Posted March 3, 2018 The alder was cut and dried locally, I assume it's European alder , Reddish colour it grows like crazy here in the forest , all over 25 metres tall with very little to no branches for the first 18/20 metres , nice clean wood . Quote Link to comment Share on other sites More sharing options...
Midlife Posted March 6, 2018 Author Report Share Posted March 6, 2018 I have all the lumber cut & squared up for 8 windows with 15 openers & 1 door for the front of the house, I'll be using the 250mm fine tooth blade to hogg out the rebate/rabbit for the openers then I'll unbox the incra and have a play around with some softwood before cleaning up the frames. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.