difalkner

Fusion 360 Adaptive Clearing

Recommended Posts

I have used 2D and 3D Adaptive Clearing in Fusion 360 before but I've never used it correctly. The concept behind the toolpath profile is easy to understand but hard to commit to doing, at least it was for me. Each time I've used it with a 1/4" spiral bit, for instance, I've used a max stepdown of 0.20". So if I had a pocket that was 0.375" deep it took two passes to reach the bottom. And with the way the Adaptive Clearing toolpath works it is slower than other profile choices so it takes a while to clear a path.

Well, today I decided to use it the way it was designed and that's to cut the full depth of the pocket in one pass. I had a very large Maple trivet to cut, 15" square, and doing it my 'old' way the toolpath projected time was 56 minutes. I changed the stepdown depth to allow for cutting in one pass and I cut the entire toolpath profile in about 20 minutes. And the shavings are large and clean - no burning or dust, just large chips like they're supposed to be.

So here's what I cut -

5af507e5b5e6a_001-Adaptiveclearing-fullpassinMaple.thumb.JPG.30dbb37a892f01f9bf673c08ba216ae9.JPG

You can see the chips here -

5af507ea0869e_002-Adaptiveclearing-fullpassinMaple.thumb.JPG.80b4e154d845322466c7f9facd8810be.JPG

Full path completed -

5af507ee8e02b_003-Adaptiveclearing-fullpassinMaple.thumb.JPG.e7572f8d153a6637c41a9e3c39453bb5.JPG

After 20 minutes of full depth cutting I touched the bit and spindle as soon as it stopped - it was cool to the touch.

5af507f29e06c_004-Adaptiveclearing-fullpassinMaple21minutesandbitiscool.thumb.JPG.e23f29ff884d5a87bb2123fbd2cd301a.JPG

Trivet with mineral oil -

5af507f75d476_005-15inchAirFryertrivetoiled.thumb.JPG.aa00d5130ea46ee1499c226762205eec.JPG

David

  • Like 1

Share this post


Link to post
Share on other sites

It's a great thing when you have a sharp endmill, have your feeds and speeds just right, and go whole hog on a material and see those perfectly formed little chips fly. :D

Also is that a 2 flute downcut spiral?

  • Like 2

Share this post


Link to post
Share on other sites

Yes sir, that's exactly what it is.  Whiteside RD4700, to be exact.

It was quite a revelation for me to see it cutting that much at once, kinda cool! :D

David

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now