Recommended Posts

Well, it seemed that everything that didn't have a home when we moved got stuffed in our master closet which didn't have any real storage options as it was.  So, next up, it's time to remedy that situation!

 

 

  • Like 2
Link to post
Share on other sites

Another great video Kev.  Don't you have the "holy track"?  I used mine for the 1st time a couple of months back and really like the Festool system.  Made drilling the holes for the shelves easy.  

  • Like 1
Link to post
Share on other sites
24 minutes ago, Just Bob said:

Another great video Kev.  Don't you have the "holy track"?  I used mine for the 1st time a couple of months back and really like the Festool system.  Made drilling the holes for the shelves easy.  

I do and will mention it in the next video..  Not sure where the bushing went but, I'll be darned if I could find it when I needed it..

Link to post
Share on other sites
22 minutes ago, pkinneb said:

Kev at about 2:55 into the video what are the clamps doing?

Looks like they're holding two sides at the same length to be cut to final length with the tracksaw. 

  • Like 1
Link to post
Share on other sites
On 7/7/2018 at 4:54 PM, ..Kev said:

Not sure where the bushing went but, I'll be darned if I could find it when I needed it

Maybe check the master bedroom closet. :P

Good video as always.

  • Like 1
Link to post
Share on other sites
2 hours ago, pkinneb said:

Kev at about 2:55 into the video what are the clamps doing?

Mel is correct. I just used them to hold the 2 sides together which allowed me to cut both sides at the same time and make them the same length. 

1 hour ago, Chet said:

Maybe check the master bedroom closet. :P

Good video as always.

Hmmm.  Might be a good idea!

  • Like 1
Link to post
Share on other sites

Lucky me as I got a twofer today. I’m just seeing this project and missed this first one. Kev, unless I missed it, is the ply and banding cherry as well? Also, on the center piece, does your fence on your ts  extend out far enough to do the dados near the center or did you have to use your router to cut them? Looking good man! 

  • Like 1
Link to post
Share on other sites
43 minutes ago, K Cooper said:

Lucky me as I got a twofer today. I’m just seeing this project and missed this first one. Kev, unless I missed it, is the ply and banding cherry as well? Also, on the center piece, does your fence on your ts  extend out far enough to do the dados near the center or did you have to use your router to cut them? Looking good man! 

Thanks Coop!

Yes, to both questions..  All cherry and the TS did reach to get all the dados.  Drawer parts are just BB for this one tho.

Link to post
Share on other sites
1 hour ago, Chet said:

Another good video.  The epoxy looked translucent, not clear, did you use something different?

No..  The fast cure epoxy hardener tends to add some color with age..

Link to post
Share on other sites

Another great video! 

I find grain/color matching one of the more challenging things when planning a large project. Especially if the hardwood that is trying to be matched is not from the same board. 

The hardwood dealer I buy from sells rough lumber which adds another level to picking boards. 

Something I am constantly struggling with.

  • Like 1
Link to post
Share on other sites
7 hours ago, Alan G said:

Another great video! 

I find grain/color matching one of the more challenging things when planning a large project. Especially if the hardwood that is trying to be matched is not from the same board. 

The hardwood dealer I buy from sells rough lumber which adds another level to picking boards. 

Something I am constantly struggling with.

Very true..  Those issues become worse when the answer you know is correct involves another trip to the lumber yard and a bunch more money flying out of your pocket on a project that lives in a closet and is already well over budget ;)

 

  • Like 1
Link to post
Share on other sites

Great job Kev, noticed the pellet stove running in the beginning, must be cool mornings in Montana!  On a unrelated note, what casters did you use on your Roubo Bench, just finished mine up and I think I want to be able to move it in the winter so I can get my car in the shop.

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Who's Online   1 Member, 0 Anonymous, 160 Guests (See full list)

  • Forum Statistics

    29553
    Total Topics
    400508
    Total Posts
  • Member Statistics

    22276
    Total Members
    3644
    Most Online
    con
    Newest Member
    con
    Joined