Mark J Posted September 19, 2018 Report Share Posted September 19, 2018 TORMEK T-7: This unit has been lightly used and is in great condition. There is negligible wear on the stone. I have had this for 2 or 3 years, but my sharpening needs have changed now that I am more focused on turning, so I am parting with this excellent system. It is being sold with Tormek Handbook and DVD as well as all of the originally included accessories: SE-76 Square Edge Jig; TT-50 Truing Tool; SP650 Stone Grader; WM-200 Angle master; and nearly full tube of PA70 honing Compound. In addition I am including a Tormek machine cover that was an extra cost option. If you would like to read more about the Tormek T-7 check out Tormek's web page. https://www.tormek.com/uk/en/machine-models/tormek-t-7/ The Tormek's are top quality and new are quite expensive. I am asking $350. LONGWORTH CHUCK: I also have a 16 inch Longworth chuck from Ron Brown's Best. This is lightly used and a great product. It mounts to your scroll chuck using 50mm jaws. The mounting requires dovetail jaws, but alas does not mate well with my jaw set, so I am parting with it. New price is $200. I am asking $100. Buyer pays shipping and packaging. Local delivery could be arranged. Link to comment Share on other sites More sharing options...
jwturner422 Posted September 19, 2018 Report Share Posted September 19, 2018 PM sent. Link to comment Share on other sites More sharing options...
Chestnut Posted September 19, 2018 Report Share Posted September 19, 2018 I thought tormeks were the bee's knees for turners? Link to comment Share on other sites More sharing options...
pkinneb Posted September 19, 2018 Report Share Posted September 19, 2018 2 hours ago, Chestnut said: I thought tormeks were the bee's knees for turners? That's all I use mine for is sharpening turning tools. To slow for other things but puts great accurate edges on turning tools. Link to comment Share on other sites More sharing options...
Mark J Posted September 21, 2018 Author Report Share Posted September 21, 2018 The Tormek is sold. The Longworth chuck is still available. Link to comment Share on other sites More sharing options...
Mark J Posted September 21, 2018 Author Report Share Posted September 21, 2018 On 9/19/2018 at 12:50 PM, pkinneb said: That's all I use mine for is sharpening turning tools. To slow for other things but puts great accurate edges on turning tools. Great edges and great for honing and sharpening a tool with an existing profile. Even for changing a plane blade bevel or re-shaping a small turning gouge it's OK. But for re-shaping a heavy turning tool like a large skew or gouge it was too slow for my likes. Link to comment Share on other sites More sharing options...
Mark J Posted September 25, 2018 Author Report Share Posted September 25, 2018 The Longworth chuck has sold. Link to comment Share on other sites More sharing options...
Recommended Posts