Sign in to follow this  
Denette

Kumiko Lamp

Recommended Posts

8 minutes ago, Denette said:

 Had to get four stitches in my left index finger.

No CA glue in the shop?

  • Like 1
  • Haha 1

Share this post


Link to post
Share on other sites

Yikes. I got myself with a chisel once as well. They glued me back together instead of stitching. Still the cheapest urgent care visit I've ever had at $60.

  • Like 1

Share this post


Link to post
Share on other sites
27 minutes ago, Chet said:

No CA glue in the shop?

Yes, but I didn't want to risk it.  My wife is NOT a fan of DIY wound repair.  ;)  And it was in a spot that moves a lot and gets wet a lot, which is exactly the condition in which CA glue would fail.

Share this post


Link to post
Share on other sites

Lamp looks awesome. Ive been wanting to make myself a kumiko lamp much like yours. 

The kumiko bug bites pretty hard. I like using it in the lids of my small boxes now. Ive gone so far as making a dedicated table saw sled for cutting the little half laps.

Not sure if anyone around here follows Matt Kenney, but im pretty sure kumiko is all he makes anymore.

Share this post


Link to post
Share on other sites

Lamp looks very nice!!

Regarding the stitches...how about a little heads up for us with weak stomachs next time...sorry had to go throw up...LOL

Share this post


Link to post
Share on other sites

I'm digging this lamp, Russel. Looks like a design that could scale out to be a coffee or end table with accent lighting.

How durable do you think the rice paper will be?

Share this post


Link to post
Share on other sites

I got the whole thing pretty well together.  It took a little fiddling with the fit of the panels, and took a bit of creativity to get the homemade LED strip bulb mounted in such a way that would still allow me to retrofit a regular bulb later on if I so choose, but I got it!  

 

Disassembled it, put a ⅛” chamfer on all the edges,  and then set out to figure out the solution to the last bit of this puzzle: how the heck to install that top panel.  Due to the fact that I’ve kind of been winging it, the top ended up being a casualty.  It’s a good bit too small.  The square kumiko panel can’t work as is, so I am going to have to either remake it or modify it.  It’s currently fudged into place on top of a larger kumiko frame that is large enough to rest on top of the rails.  It’s not going anywhere right away, anyway.  I’ve got to figure something out, though.

 

So, for now, the project is on a hard pause.  Since this project is for my own house, I have dry-assembled and pre-finished the entire lamp.  For a lamp that will never be touched, the joinery alone is plenty to hold it together.  I’m doing this because I’m uncertain about those legs.  Are they too tall?  I’m unsure.  I’m also not even about to let that top be this lame when I call this one complete.  So it gets to perch in the living room this week, looking finished but secretly still devoid of glue in the frame.  I’ll mull it over.

 

8483E296-3A26-4AD6-8AE2-0DD4D1FD1ABD.jpeg

55682544-817E-4C2D-9C3B-12DE8F9D4C4C.jpeg

  • Like 2

Share this post


Link to post
Share on other sites

I agree with highlander - I think the proportions of the legs are just fine.  I also don't mind the elevated look and fit of the top.  I'd glue it up if it were me and stop pointing out the "errors."

Also agree that is seems a shame to hide two sides of it.  Hope that's not its final resting place.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this