Sign in to follow this  
JohnG

Cherry Wall Cabinet

Recommended Posts

2 hours ago, Chestnut said:

Man that is a beautiful wall cabinet. I love the look of that cherry.

I also think the thinner shelves would probably look better now that you say something. It might be worth the effort to think them out now. For me after it goes in service i never come back and correct anything. I just live with it.

Do you like the look of the little resin pockets? If i had a good amount of boards with it, I think it could be incorporated into a project to give a cool effect.

Thanks! That means a lot coming from the king of cherry! 

I agree, I’ll make the thinner shelves before I put it on the wall. I also need to make the drawers before I mount it or they will never get done. 

I do like the resin pockets. Like all figure, spalting, and other visual characteristics they can be used well or not well. The inside face of the left door panel with them was actually supposed to be the show face, but when I resawed the board there was a bunch on that piece and almost none on the bookmatched piece, so I had to change plans. I thought it would look off with a bunch in one panel but not the other. I think a piece of furniture with them throughout would be pretty neat. 

1 hour ago, Chet said:

Even going to 1/2 inch could make a difference.

Really looking nice though.

Thanks for the input, I may have a piece of 1/2 scrap I can compare it with, but I think I’ll go 3/8.

Share this post


Link to post
Share on other sites
19 minutes ago, JohnG said:

I do like the resin pockets. Like all figure, spalting, and other visual characteristics they can be used well or not well. The inside face of the left door panel with them was actually supposed to be the show face, but when I resawed the board there was a bunch on that piece and almost none on the bookmatched piece, so I had to change plans. I thought it would look off with a bunch in one panel but not the other. I think a piece of furniture with them throughout would be pretty neat. 

If the inside of that door had match after the resaw, i think that would have made for a very interesting pair of door panels. Throughout the whole project might be a bit much but using it in a door panel or for slats or accent pieces would be really cool. A lot of times I end up having to treat it like a defect and turning it in or removing it which is unfortunate.

20 minutes ago, JohnG said:

the king of cherry! 

Until you all pointed it out i never thought about how much cherry i use. It's just so pretty though.

Share this post


Link to post
Share on other sites
37 minutes ago, Chestnut said:

If the inside of that door had match after the resaw, i think that would have made for a very interesting pair of door panels. Throughout the whole project might be a bit much but using it in a door panel or for slats or accent pieces would be really cool. A lot of times I end up having to treat it like a defect and turning it in or removing it which is unfortunate.

Until you all pointed it out i never thought about how much cherry i use. It's just so pretty though.

Agreed. I think if it had it sparsely spread throughout it would be cool, but that might not be the nature of it. Like other figure, I think it quickly goes from very neat to overboard.

I hope you don’t take it the wrong way, cherry is an awesome wood. I expect that most of my future projects will be cherry. It’s nice to work, looks beautiful, and ages well. 

Share this post


Link to post
Share on other sites

I think the existing shelves look just fine and for a functional piece form follows function.  They are going to get loaded with heavy tools.  

Thanks for the feedback on the hinges.  Are you using bump stops on the doors?  I have seen those adhesive backed plastic buttons in thicker versions which could help keep the inner edges of the doors level with the hinge edges.

Share this post


Link to post
Share on other sites
23 minutes ago, Mark J said:

I think the existing shelves look just fine and for a functional piece form follows function.  They are going to get loaded with heavy tools.  

Thanks for the feedback on the hinges.  Are you using bump stops on the doors?  I have seen those adhesive backed plastic buttons in thicker versions which could help keep the inner edges of the doors level with the hinge edges.

Thanks for the input. This will just hold my camera and lenses. I wish I had enough glass to require 5/8” thick shelves! I’ll keep both sets and see which I like better.

I had originally planned on small magnetic catches, but will now go with those clear bumpers. I think my hinges are slightly off axis or plane because the doors have a slight bit of resistance to them, but in use I don’t mind that. 

Share this post


Link to post
Share on other sites
On 9/7/2019 at 12:20 PM, Chestnut said:

Though pallets do make awesome fires.

Out door fires yes, I wouldn't suggest using pallet wood indoor fires.   Pallets, especially ones the come from the food industry warehouses are frequently treated with pesticides and fungicides. 

  • Like 1

Share this post


Link to post
Share on other sites
32 minutes ago, Chestnut said:

Subtle but MUCH MUCH better. Beautiful work makes me want one.

Thanks, I really like the 3/8 shelves over the 5/8 ones. Now I’m wondering if the drawer divider and bottom shelf should have been thinner too. 

Share this post


Link to post
Share on other sites
10 hours ago, K Cooper said:

Nah, don’t second guess. Proportions are great, just as they are. 

I'm not going to redo it or scrap it, and it may change once I have the drawers in place. It is more a question of general design.

Share this post


Link to post
Share on other sites
1 hour ago, JohnG said:

I'm not going to redo it or scrap it, and it may change once I have the drawers in place. It is more a question of general design.

I think the center divider will look a lot better with drawers in place. The shelves are a bit different as they won't have something like a drawer front right next to them.

  • Like 1
  • Thanks 1

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this