duckkisser

flip top tool stand

Recommended Posts

was thinking of building a couple of flip top tool stands to save space in the shop.  if anyone has one can you tell me if it was worth building,  how difficult was it? anything you would do differently?

Share this post


Link to post
Share on other sites

Hey Duck! I built this a few years back and have enjoyed the flexibility and the space saving. There a couple of different designs on the net and I took what I thought were the best ideas. It is on casters. 

7F33F149-3442-41B6-AA35-6750105193D5.thumb.jpeg.542f4116f0ad331dc1f533a4006fbd25.jpeg

Share this post


Link to post
Share on other sites

One of the best Saturday mornings I spent toward shop improvements.  Dad is still using this one.

56f7ed7a9d8b1_fliptop-2009flipping.thumb.jpg.45940ddab2be72b87e9e83f293b34d18.jpgfliptop1.jpg.74554fc09ef70c25a3233470ba2e02ae.jpg

Things I did differently: I made one side of the table removable so I could change t-nut positions when changing machines being used on the stand.  I went through 3 interations, dad has always had the DW735 planer and the Ridgid belt/spindle sander.

  • Like 1

Share this post


Link to post
Share on other sites
43 minutes ago, wtnhighlander said:

Coop, assuming that is a Rigid oscillating sander on bottom, what did you do with all the bits and pieces from the front storage pockets?

They are in the drawer below. One of the few times I thought something thru before constructing. 

  • Haha 1
  • Confused 1

Share this post


Link to post
Share on other sites

I built a flip top for my shop and wisely thought it would be good if I made it big enough for four or more tools. Jointer, planer, sander, grinder and one other I never figured out how to fit :) 

It was about 3x5 and too big. It wasn’t handy. The bottom just collected junk, and it was a mess. Long story short, last year I converted it to a permanent top bench, put my new lathe on it, added a drawer for the turning tools and accessories (still pondering a second drawer) and I’m happy with that. 

So yeah, they can be good, but I tried to save space and ended up taking up space. So, unlike “some” people around here, definitely plan ahead! And for sure it has to be on casters.

  • Like 1

Share this post


Link to post
Share on other sites

thanks guys was thinking I would build two of Drew fishers flip top stands he built his with power plugged into it so the machines always have electricity no matter which side you flip up.  need to build one for my drum sander/planer and one for my belt sander/oscillating sander.  or my oscillating sander when I eventually get one.

 

  • Like 1

Share this post


Link to post
Share on other sites

I’ve built two of them (not based on the one linked above) and really like them. 
One holds my Ridgid sander and lunchbox planer, and the other holds my small drill press and 10” bandsaw.  The bandsaw ends up a bit higher than is ideal, but I’m tall so it isn’t too bad. I did not add a lower drawer to the second stand to save the height. 
 

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.