Sign in to follow this  
rodger.

Sherwin William Kem Aqua Pig. Lacquer

Recommended Posts

Getting into the world of HVLP lacquers (water based) as I need some "painted" pieces. I am an experienced HVLP sprayer, mostly using high performance poly by General Finishes (through the Earlex 5500 spray station).

I have done quite a bit of reading, and have a copy of the technical data sheet. It does not specify the tip size for HVLP sprayers. I have a 1.5mm and a 2.0mm tip, and there is a 1.0mm tip available.

Any advice for sprayer water bourne pigmented lacquer? 

Share this post


Link to post
Share on other sites

I spray Kem aqua with a 1.5 Tip. and a 2 stage Turbine. a BIT of thinning was required. and i mean like 3-5% 

I just got a 4 stage but i havent sprayed with it yet.

Share this post


Link to post
Share on other sites

It's pretty thick, relative to others.  I suggest getting a Ford cup, and learning exactly how to thin it the same, so it works like you want it, every time.

Share this post


Link to post
Share on other sites
15 hours ago, Tom King said:

It's pretty thick, relative to others.  I suggest getting a Ford cup, and learning exactly how to thin it the same, so it works like you want it, every time.

My sprayer came with a viscosity cup, but I don't know if it's "standard" or not.

19 hours ago, socoj2 said:

I spray Kem aqua with a 1.5 Tip. and a 2 stage Turbine. a BIT of thinning was required. and i mean like 3-5% 

I just got a 4 stage but i havent sprayed with it yet.

Was it not performing well at regular strength?

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this