Popular Post curlyoak Posted August 29, 2020 Popular Post Report Share Posted August 29, 2020 I built the cedar potting table a year ago for my neighbor. They didn't like the view of buckets and boxes. I made the styles and rails 1 inch thick dressed. The 1 inch stock around here is 11/16 with one face rough. I milled it out of 2" stock with leftovers for slats. The frame is held together with dominoes. I used the large domino 700 for this project. I also added permanent slats on the ends. The table is cedar also. All metal is stainless steel. The legs have 1/2" high density slippery plastic attached to the bottoms. Cant suck up water and rot. The choice was no hinges. There are 2 - 1/4" ss bolts on each panel along the rail. Capped off with a ss wing nut. The wood is very light. Easy on and off. 6 Quote Link to comment Share on other sites More sharing options...
BillyJack Posted August 29, 2020 Report Share Posted August 29, 2020 Looks nice.... 1 Quote Link to comment Share on other sites More sharing options...
Coop Posted August 30, 2020 Report Share Posted August 30, 2020 Darn nice job! Proof that not all fine Woodworking belongs in the house. I recall @TerryMcK‘s arbor gate a couple of years ago. 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.