Recommended Posts

Hi,

I finally made a flat worksurface to work from using 25 mm moisture resistant MDF.

I was wondering if i could put anything on it that would make it easier to wipe off glue and help protect it a little more?

I am planning to add some dog holes so im thinking that would be better to do after a finish.

Any advice would be great

 

Many Thanks

Luke

Worktop.jpg

Link to post
Share on other sites

I use hardboard as the top layer on my assembly table.  I screw it down from the top so that it's easily replaceable when needed. Simply pull the old off and use it as a template for the new.  About 15 minutes to replace every few years or so.  I usually toss a coat of wipe on poly on it so that the glue pops off easily.

Link to post
Share on other sites

Plastic laminate would make a surface that would make popping dried glue off easy peasy.  I've used it in a few places in my shop, when I buy it I go to  shop that installs plastic laminate I buy their remnants they usually have some good sized pieces when they do a kitchen or bathroom counter top job they have to buy large sheets cut them down to fit the countertops then they store the remnants and the place I get mine from is a flooring company who also installs laminate. The table in your picture would probably be a three piece job, I find doing the laminate work pretty easy I use contact cement they make 2 kinds water based and the stinky bad assed stuff that's what I use because that's what I've always used I've never used the water based the pros use the stinky stuff. If I was building a table that would be used for glue ups this is what I would do. But there a number of options all the comments above are cheaper and easier.

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.