Fein Turbo II Dust Extractor automatic function not working ?


Martin-IT

Recommended Posts

I have a Fein Turbo II Dust Extractor, which is over 15 years old.

I used it only as a dust extractor with my random orbital sander.

It has an automatic turn on/off function (automatic), that when the sander is turned on, the vacuum will start and stop 15 seconds after you turn it off. 

This function is common, but at that time, it was one of the few offering it.

For probably a year now, sometimes the automatic start will work, sometimes not, and it will just turn itself off after a few minutes. But, the sander will start and keep on working.

The sander does start (it is plugged into the vacuum).  If I set it to manual, there is not issue, it seems to be the 'sensing' of having the sander on or off which is not working.

Any suggestion ?

 

 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.