Juicegoose Posted April 4, 2011 Report Share Posted April 4, 2011 Went to the woodworking show over the weekend and bought a new router table. Also bought a stand to go with it but it had the original demo router table top on it. I don't need both so i'm selling the table and insert. The table is the white melemine coated mdf woodpecker table (34 x 24) it has never had a piece of wood across it. This was used as the demo table for sales by Woodpecker. You can check out woodpeckers website for the specs. http://www.woodpeck.com/rt2432p.html Also I'm selling my woodpecker/pinnacle phenolic router insert to go with the table. This too has seen very little use(literally i mounted the router and ran some test boards over it). The insert is setup for a porter cable 690/890 router and comes with 3 lock rings. Sadly I don't have the spanner wrench to go with the insert. If anyones interested I'll take 125. I'd rather not ship as the table is large and heavy. I'm in Houston Link to comment Share on other sites More sharing options...
Recommended Posts