Sold - Freud SD508 8" Super dado set

[fcschoenthal]

Freud SD508 8" Super dado set complete - Sold.
It includes 6 chipper blades and 10 shims, so you can dial in the exact width you need.
I bought this and then found out that isn't recommended for a SawStop due to the kickback feature. My loss is your gain.

Includes
Two 24-tooth -12° hook, ATB Blades
Four 1/8" FT 4-tooth Chippers
One 3/32" FT 4-tooth Chippers
One 1/16" FT 4-tooth Chippers
10 shims
Case & setup guide
 

[Beechwood Chip]

A little searching suggests that the dado set works fine in all Sawstops except the Jobsite saw.  Because of the kickback shoulders, the dado blades may not stop as quickly if the brake is activated.  That's why Sawstop says not to use it.  The odds of flesh contacting the dado on a non-through cut is small, but i guess you could have a kickback that yanks the wood out of your hand.

[fcschoenthal]

I may have jumped the gun a little, but it sold for what I paid for it.

I'll probably end up paying more for another, but will now know more what to look for.