jschen Posted July 18, 2012 Report Share Posted July 18, 2012 As topic states I'm in the design and planning stages of building a hall table with shelf. I'm going to build something similar to Corey's Occasional Table in the view's section: http://www.thewoodwh...t_type=tables-2 I'm curious on the best way to mount or type of joint to use for the bottom shelf to allow for wood movement since it appears the shelf is trapped inside the legs. I'm thinking of notching the legs to allow for the shelf to sit on and leaving a gap in the rear legs to allow for movement (might not be that noticeable in the rear). Any other ideas putting a shelf on the table? Quote Link to comment Share on other sites More sharing options...
MatthewCremona Posted July 18, 2012 Report Share Posted July 18, 2012 jschen, check out this thread: Quote Link to comment Share on other sites More sharing options...
jschen Posted July 19, 2012 Author Report Share Posted July 19, 2012 Thanks I think that will work nicely. The table is very nice and hope mine comes out very similar. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.