Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Finishes: Know what you're buying....

Featured Replies

I just posted a mini-rant in a reply to a fellow member asking about Formby's Tung Oil Finish, then ran across another thread where someone asked for help after finishing with Watco Danish Oil.

 

Guys, read the material labels and the MSDS for these fancy finish products, you'll find they're mostly solvents. Just for an example(and I'm not just picking on Watco, I used a lot of their finish before I learned better), the Watco Danish Oil MSDS. Buy a pint from Highland and you're out $8.99, pretty typical price. Quarts are $12.99, gallons $35.99

 

Now look at whats in it according to the MSDS: First of all, there's 51-60% naptha. I bought a gallon of naptha the other day at Lowe's, cost me $12.50 or $.09/oz. Average at 55% and there's 8.8 oz of naptha in that pint of finish, $.79 at retail. Next ingredient is "Linseed Oil, Acid Refined", commonly known as boiled linseed oil which is never boiled. Cost for a gallon at Lowe's again, $25.00 or $.19/oz. Average the MSDS listing at 25% or 4 ounces, that's another $.80 at retail. Now there's another 1-10% of unspecified "cobalt compounds", presumably colorants. have no idea what the retail price of those are but at wholesale likely pretty cheap. Another 1-10% of trimethylbenzene, another hydrocarbon so plentiful that only one refinery in the US bothers to isolate it and they sell more than 10 million pounds a year(Google is your friend) so it can't be worth much(pretty nasty stuff as far as you and the environment are concerned, read the EPA report).

 

So overall, this is just naptha and blo for the most part, considering that the MSDS lists the other ingredients at as little as 1%, I think I'm pretty confident in that conclusion. So a gallon of naptha costs $12.50, use 55% of that at a cost of $6.87. Now I ignore the cobalt compounds and the trimethylbenzene since they're at minimum only 2% of the finished product, use 35% of the blo at $25/gal for a cost of $9.25, I have a gallon of essentially what Watco markets at $9/pint for $16.27. And you can bet Watco isn't buying raw materials at Lowe's in gallon cans............

 

Actually, Watco is a "best case" for comparison, at least they use naptha instead of mineral spirits for their primary solvent.

 

The more I learn about finishing the more amazed I am at how little truth in advertising there is in the wood finishes business. "Tung Oil Finish" that never came close to a tung nut unless the trucks passed on the highway, waterborne "lacquers", "pre-cat" finishes(a contradiction in terms, I ROF and LMAO every time I hear that one), it's all just advertising hype dreamed up by high-priced marketing consultants to maximize revenue for their clients. The bigger the client the bigger the marketing budget, the grander the claims, the cheaper the product. And who pays the price for all this marketing BS? You get three guesses and the first two don't count.

 

So what's my point? Educate yourself as to what you're buying, don't pay finish prices for cheap solvents and let the manufacturers know that you want to know what you're buying. Don't let them hide their products behind buzz words and hyperbole, Buy from honest manufacturers that advertise what they actually sell instead of what some marketing consultant tells them they ought to market their product as based on the latest consumer research buzz words.

 

Example: Lately I've been spraying General Finishes Enduro Lacquer, a waterborne product. I like it, it sprays nicely, levels well, gives me a reasonably durable finish, tougher than nitro. But it ain't lacquer by definition, can't be thinned like lacquer, doesn't lay down like lacquer when it's wet, doesn't dry as fast. It also doesn't blush like lacquer in high humidity conditions, doesn't contain volatile hydrocarbons and cleans up with water instead of lacquer thinner. It's actually nothing like lacquer when it comes to application, durability or environmental impact. If they'd call it "Enduro Waterborne Medium Duty Finish" I'd buy just as much and feel better about paying a little more, I'd know what I was buying up front and wouldn't have to have done all the behind-the-scenes research to know what I was actually using and the benefits and drawbacks of the product.

 

So I guess what I'm saying is that as long as we as end users continue to spend our hard-earned dollars on solvents and mislabeled products that may or may not meet our needs all we'll get is more of the same old crap. It's up to us where we go from here.

 

Best,

Bill

 

The more I learn about finishing the more amazed I am at how little truth in advertising there is in the wood finishes business. "Tung Oil Finish" that never came close to a tung nut unless the trucks passed on the highway, waterborne "lacquers", "pre-cat" finishes(a contradiction in terms, I ROF and LMAO every time

 

Best,

Bill

Lacquer is any finish that cures by evaporation. It's just a generic term now days. Precat implies acid catalyzed with most companies that is the case.

For example my empties for the week heading to the trash. The bottom two precats are acid catalyzed the top three are not. The precats are tougher finishes. I agree folks need to do their home work. If you do your homework it could be joes super juice it really doesn't matter.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Who's Online (See full list)

  • There are no registered users currently online

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,010 Total Members
  • 3,644 Most Online
  • Lolli4 Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.