Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Planer/Router table combo - Small shop solution

Featured Replies

post-2771-0-06577900-1380313069_thumb.jppost-2771-0-32472000-1380313113_thumb.jppost-2771-0-35041800-1380313229_thumb.jp

 

Okay, I can't remember who asked me to post this. But somebody did. When they asked I didn't have any photos of it, so I took some with my phone. Anyway, here are some shots of my flip-top cart which tucks nicely under my small purchased router table. I have had many router tables over my woodworking life. I've purchased 3, built 4, had one in the wing of the table saw. One thing I'll say for this little Bosch is the dust collection is incredible. I run it off (2) 4 inch diameter hoses, one in the fence one in the side of the table, and it doesn't miss a spec of dust... really quite amazing for a table I picked up off Craigslist for a song to use as a backup router table.

 

 

 

Anyway, here's my flip-top solution. I hope you like it.

 

You will probably notice as with all my shop furniture (up until recently) it was built, sturdy and to serve a purpose, but it ain't pretty.

I've changed that philosophy recently. Now I try to make my shop furniture as pretty as my commission pieces. That way it acts as practice. Also allows me to try new techniques/finishes...  I learned this from Marc.

That looks like a sweet setup! I would like to hear more of your opinion of the Bosch router table; there's one available in my area (overpriced) and I'm tempted.

  • Author

@atratinus, The Bosch router table is actually pretty darn good considering its size and low cost. I got it as a bridge between router tables as I needed something to keep my going while I worked on a permanent solution. However, having said that, I don't think I'll ever get rid of it now.

 

The table top is kind of small, but not a problem for most average sized pieces. It would probably be undersized for large raised panels. However, you could probably get by if you had to. (I'd recommend anchoring the unit down.) The fence is actually better than most commercial fences I've seen. Yes, it's small. But, it is super easy and quick to adjust and it is dead on 90 degrees. There are very few adjustments that can be made on the fence or on the baseplate, but all the things you NEED to adjust do, and everything is quick and intuitive to adjust. Where this table really excels is dust collection. I have a ClearVue Cyclone in my shop and I connect (2) 4" hoses to the Bosch table. One to the fence and the other to 4" port I stuck in the side of the box itself. Hopefully this can be seen in the photo I took with my phone. I taped over the actual dust port in the back of the box, which was only a 2-1/4" port. I am amazed at how well it collects. Seriously, the router under the table is spotless, not a spec of dust. The table top doesn't get any dust on it either as long as I'm using the fence. For free routing you will get a bit on top of the table, but very little.

 

Like I said, I bought this little bugger off Craigslist for almost nothing at it really exceeded my expectations. Which is why it is still in my shop even though I got it as a temporary solution.

  • Author

Nice Setup. What are the rails on the side of the cabinet for?

 

Oh those, yeah, those are the handles I use to pull the rolling cart out from under the router table.

Interesting story. When we had our house build my wife chose "oil rubbed bronzed" cabinet door and drawer pulls. So anyway we show up and all the pulls in the house are the correct size and shape, but they are brushed aluminum. My wife points it out right away. The builder says "Oh, we thought that was weird considering everything else in the house is oil rubbed bronze."  

Anyway, so they got us all new ones and let us keep the old ones too. So, I've been using them here and there for projects. I did a built in Murphy Bed for a client with some shelves and cabinets on either side. I used a few of those long brushed aluminum pulls on there as well.

Thanks for the additional details, Chet. Of course, the listing for the unit I saw has already been pulled!

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Who's Online (See full list)

  • There are no registered users currently online

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,010 Total Members
  • 3,644 Most Online
  • Lolli4 Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.