Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Denatured Alcohol vs. other solvents for penetrating stains

Featured Replies

Anyone know the differences (pros/cons), if any, between using denatured Alcohol as compared to other solvents (mineral spirits, naptha, etc.) in penetrating stains?

Assume the top coat(s) will be sprayed on lacquer.

Thanks.

Cheers,

Chemistry...

Generally, alcohol soluble dyes (aka penetrating stains) won't dissolve in petroleum derived solvents, e.g. naphtha, mineral spirits, etc. Go with the manufacturer's instructions.

Water raises the grain. Alcohol is not supposed to raise grain but does on most softer woods like poplar. Oil does not raise the grain. Think of oil soluble dyes as wiping stains they are the most consistent but take longer to dry. Alcohol drys almost instantly and does not work well as a wiped or brushed dye. Water can be brushed and flooded with pretty decent results. Any of them can be coated with lacquer BUT the oil should be coated with something that is going to dry real fast so not a brushing lacquer like deft.Some dyes like transtint concentrate can be used in all of the above with a the aid of a few tricks. Lockwood makes dyes that are made for each. Ive always suspected transtint concentrate is a Lockwood alcohol soluble dye repackaged the colors are identical.

Then you have translucent tinting and each has its place. Water of course will do well in WB poly but not WB lacquer. With WB poly you have to use what ever the maker suggest for thinning not plain water. Alcohol does well in lacquer but does even better in lacquer thinner with a lacquer binder. Oil of course does well in OB poly but only in very small quantities and does real well in lacquer.

Then you have opaque tinting. Water does not do well in anything even WB poly. Alcohol does well in Lacquer BUT not brushing lacquer like deft. Oil does not do well in OB poly and does fine lacquer but not conversion varnishes.

My rule of thumb is to skip the water, use alcohol for spraying and both types of tinting, use oil as a wiping stain.

When I say opaque I mean something along the lines of these two finish samples. Both are clear lacquer tinted with alcohol soluble dye and white blend.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Who's Online (See full list)

  • There are no registered users currently online

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,012 Total Members
  • 3,644 Most Online
  • JAR Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.