Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

All roads lead to......Arm-R-Seal?

Featured Replies

First, thank you Marc. I am a total newb to fine woodworking, and I have learned more from your videos than all of the books and periodicals combined. I have built Master Norm's router table, although my drawers don't look as nice as his, and a workbench. Figured starting with shop tables would help me gain some needed experience, and boy have I learned a lot!!

I need to finish the workbench, which is just dimensional spf, but it sure looks nice after running the boards through the planer and squaring them perfectly with a quality rip blade. I like the starkness of the whiter wood, and want to keep that, but obviously add a layer of protection. I already have Minwax Polyurethane and Polycrylic in the basement. Polyurethane will yellow it more (right?) than the water bases stuff. Neither are wipe-on. So which should I use? Well, Arm-R-Seal of course. First coat thinned with mineral spirits.

This (finally!) brings me to my first conclusion/question: Seal-A-Cell is really nothing more than Arm-R-Seal thinned, correct? Justa marketing thing? So anywhere on the forum I see Seal-A-Cell I can simply sub thinned Arm-R-Seal?

Second finishing project. Picture frames with beautiful curly maple (want to "pop" it) surrounded by poplar which will get GF Gel Stain Java. These will then be lacquered.

So, to pop the maple I should use shellac with a little dye. But wait. Aren't some suggesting Seal-A-Cell (therefore, Arm-R-Seal) with a little dye? Now to prevent botchiness on the poplar, 1# Shellac before the Java stain. Or, how about thinned Arm-R-Seal before the Java?

Confused. Do I really just need Arm-R-Seal and some dyes/stains in my workshop?

Let me see if I can clear the air a bit. While I do believe Arm-R-Seal to be a superior product to most varnishes on the market, keep it mind it truly is just a wiping poly. You can also get good results with Minwax polyurethane, diluted 50/50 with mineral spirits, essentially making your own wiping varnish.

As for Seal-a-Cell, it is my belief that the product is far too similar to Arm-R-Seal to justify buying it in addition. Again, it is just another wiping varnish. Some believe that Seal-a-Cell's darker amber color actually makes a visual difference in the final product. I have not seen this in my work. I even did a few test boards in the past using maple and really could not tell the difference between boards with an Arm-R-Seal pre-treatment and those without. This is why I don't use the product anymore. So this isn't a general "known truth" so much as an expression of my opinion. Others will feel differently.

As for popping the grain, if you want to use dye, you can actually cut out the shellac. Sometimes I just like to use a dilute shellac solution to help lock the color into the grain. Since you are sanding afterward anyway (if you're going for a vivid effect), the shellac really doesn't make a huge difference.

I would first suggest taking a little Arm-R-Seal and a test board and seeing what you think. Many times, figures woods need nothing more than some finish to make them look amazing. Dye is only used to enhance the effect. But always try the simple route first before complicating things with dyes. Again, just my opinion.

As for blotch control, these days, Im all about Charles Neil's Blotch Control formula. Works way better than shellac for blotch.

Hope that helps.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Who's Online (See full list)

  • There are no registered users currently online

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,010 Total Members
  • 3,644 Most Online
  • Lolli4 Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.