Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Mobile Tools, Stationary, Dust Collection?

Featured Replies

The Question first, I find it helps to get it out first.

QUESTION - Should I "cement" the tools with hardhook ups or just go with more of a mobile shop?

QUESTION - How do you guys with more mobile setups end up running vac lines?

My equipment - ClearVue 6" Ducting,Table 220v, Band220v, Miter (<-saws) Jointer220v, Planer, Router. Electrical is not really a challenge, I have sub panel in the garage, lines run, and plenty of adequate 220,110 extension cords.

 

The Shop is my garage. Cars havent seen the inside of it since I got it.
I have been planning on leaving the door up, but adding a pseudo shed
wall infront of it to help stabilize the temperature swings in it.

 

About me:

I am a very amatuer woodworker. I had a storm clear/devastate part of
my land, I hired a sawmill to mill the wood and I filled up my barn.
Orignally I was going to hire custom guy that was going to finish the interior of the
house that was to be built there. The house was never built and I bought
tools to work the wood for various tasks. Fence boards, Barn Siding,
Adirondak Chairs, Shelving/bookcases, etc. I work my garden in most of
my spare time and still do not spend hours at a time in the shop. But,
the one thing I have learned, I like making things.

 

Other info:

I ask as I saw the mobile base for the Justins Workstation that was
just posted and it brought back the thought in my head of mobile vs
stationary tools and dust collection. There are obvious avantages to
both setups. The two big ones for me:

1) stationary, means if I
need to rip a board from 5.5" to 5.37" to fit in a gap on the shed,
fence, latest play set up grade, it will actually get done. The band saw
gets used a lot, its stationary, has a small table so nothing
"accumulates" and it is handy for a "quick cut" on just about anything.

2)
Mobile means obviouisly that there is space not taken up by tools.
Conversly it means those tools are out of the way and less likely to get
used. Besides if I open up space in the shop because a tool is off to
the side, it likely wont have space to move back out. ;)

I am sure there are other pros and cons, and I am not really looking for you to solve that dilemma for me. Really I more interested in the intial two questions.

 

Well, Thanks for those who have the time to read this, those that contribute, and those that refrain from commenting becuase their momma taught them well (say nothing if you have nothing nice to say).

 

Regards

 

MEL

 

 

I prefer stationary tools and hate extension cords especially those big ones. The only tool I leave semi mobile is the shaper but I only pull it out a foot to run real long stuff. If you have the space to put every thing its easier to develop a workflow in a stationary shop.

I have a somewhat similar shop setup (# tools stationary DC, etc.)  I have most of them on mobile bases, originally because layout was tight.  But now I haven't moved them in 6 months, and I have semi-hard ducting to the power tools.  I have changed the layout in my shop a few times as I added a new tool, or workbench.

 

This year I bought a dust separator and built a workbench, both of these reduced the amount of time I spent setting up for an operation, which completely changed they way I look at each cut/plane/operation.  I also seem to turn out projects faster.  If I were completely set in the way my shop was set up (getting close) all the tools would be ducted.  Right now I still have to switch a couple, and the longer it stays that way the more frustrating it gets, the same for those that share an extension cord.

 

I guess I liked having the mobile bases until I found a setup that works the way I do, and now I am slowly "cementing" it as you say.  And now I like that it allows me to expand or (with some grumbling) adjust to fit a larger project as needed.  That said, I haven't found the need with my new layout.

 

Just saw your second question...my tools are grouped around the large duct drops, and I have a flex hose just long enough to reach the 3 tools that share it.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Who's Online (See full list)

  • There are no registered users currently online

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,010 Total Members
  • 3,644 Most Online
  • Lolli4 Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.